Inkjecta Flite v2 and FK Irons RPG Grip

[rayofthedead]

does anyone know if these 2 will work together? I think the only question is, does the end of the bar fit down the RPG Tube. I love FK's Delrin 1.25" Grip and I just traded for a Flite and would love to use them together. Any input is appreciated. Thanks.

[needlemaniak]

Was wondering the same !


Sent from my iPad using Tapatalk

[needlemaniak]

Could you tell me once you have the flite in hand ?


Sent from my iPad using Tapatalk

[chris-in-cali]

it might work...but i believe you would have to use the rpg's drive bar and not the flight's.

and then if if it had a loop...you would have to cut it off and use that end to insert into the flight cam.

only reason i know is because i used t-tech drive bars with my flight

[rayofthedead]

I mad my own rigid bar by just cutting a needle bar to the appropriate length. It works great! I'm investigating how to possibly use the spring bars with it. I'm guessing it might entail boring out the top while in the Delrin. Not sure how it would effect using it on other machines with the rigid bar...

Sent from my SAMSUNG-SGH-I317 using Tapatalk

[needlemaniak]

So what cart grip can we use with the flite's drive bars ?


Sent from my iPad using Tapatalk

[Shawn]

Byron from injecta told me that you can use the cheyenne flex grip with the vice model flite but you have to have the flex bars from the combo flite because they are longer than the flex bars that come with the vice model flites. He said that if you have the injecta grip that the flex bars that come with the vice model work perfect together. The flex grip comes with a rigid bar with a loop. If your using a grip with no adjustment then the ridged bar needs to be 73 mm long and with adjustable grip it needs to be 86 mm long. Hope this helps.

[needlemaniak]

Where can you find the injecta grip ? I'm not sure to understand everything and the point of the vice model


Sent from my iPad using Tapatalk

[needlemaniak]

I think the flite will be my next machine but I want to use it with the disposable cart grips that are about to be made by a few companies and don't know which flite model I must choose and how to use disposable on them


Sent from my iPad using Tapatalk

[rayofthedead]

I was unaware I couldn't use the flex bars that came with the vice version. Does anyone know where I can get the longer ones? All the Australian and UK sites are out of stock.

Sent from my SAMSUNG-SGH-I317 using Tapatalk

[Shawn]

If you get the vice model flight you will be limited to the rigid bar only if you use the disposable tubes coming out. Because the tube stems on the disposables won't accommodate the plastic slide on the flex bars. Stencil stuff sales the non adjustable injecta grip and protat as well.

[needlemaniak]

Thanks for your answer !


Sent from my iPad using Tapatalk

[needlemaniak]

This is something manufacturers need to do : a disposable cart grip for combo model (or Cheyenne) or an adapter for vice model which allows to use all flex bars


Sent from my iPhone using Tapatalk

[needlemaniak]

It's very frustrating to know that you can't use all the possibilities of the flite if you go all disposable


Sent from my iPhone using Tapatalk

[hendricksonart.com]

I am considering the flight but want the vice version. I have way to many t tech grips to just have sit around. will the drive bars on the inkjecta work well with t tech grips.

[Bishopbyname]

I am considering the flight but want the vice version. I have way to many t tech grips to just have sit around. will the drive bars on the inkjecta work well with t tech grips.

Yeah no problem, i have an Inkjecta V2 vice model, still getting used to it. I wouldn't put it in the plug in and play category of rotarys. I have used the Cheyenne fixed grip, Inkjecta grips and T-Tech grips. T-Tech carts seem to fit more snug in all the grips i've used too?

[sacredsouls]

So I could get a flight and use say the tat soul disposable cartridge tubes with these? I still can't get passed the idea of not autoclaving a hawk grip. I know you can but they start to break down and that is a lot of money to have get fried in the clave.


Sent from my iPhone using Tapatalk

[Dreviltattoo]

I just ordered a vice version and now I'm looking for 86mm flex bars to use with the hawk flex grip. Anyone have any info? I just wanted to be able to use disposables for bangers and now I can't find bars to work w the flex grip. Might have to send it back. Fml

[Tat2dPinoy]

I have a vice Flite on the way because of the debut of disposable wrath cartridge grips and I want to stay fully disposable. I've heard you can cut the loops off and still use the rigid plungers, but the drive bars with give will not work, the guide is smaller than the inside diameter of the tube. My question is, couldn't you use heat shrink wrap on the guide to fill and fit the inside diameter? Or any other suggestions?

[sacredsouls]

I would imagine you could to make the difference but the you would kill the springability of the give bar. Right?


Sent from my iPhone using Tapatalk

[fkirons]

does anyone know if these 2 will work together? I think the only question is, does the end of the bar fit down the RPG Tube. I love FK's Delrin 1.25" Grip and I just traded for a Flite and would love to use them together. Any input is appreciated. Thanks.

We have custom bushings that we have fitted for many customers wanting to use our RPGs with their Flite. Anyone interested in RPG customization please drop us a line. Contact info at fkirons.com (trying to avoid web crawlers).


Sent from my iPhone using Tapatalk

[nathan bauer]

I am seriously thinking about the flite.i would get the vice as well.(too much for cheye en grips to me as well).has anyone tried the flex bars with either bishop or kingpin cart grips yet?