Dan Kubin machines rca question.

[kbzeeh]

Hello everyone. I don't post much here but I have a question for anybody using one of his machines. I just received an mc14 and a sidewinder to add with my mc2. And wanted to know what you guys use with this? Rca or clip cord?
I know Dan recommends a clip cord or that combo that I also bought. But I wanted to hear what you guys think. Any help would be great. Thankshttp://img.tapatalk.com/d/14/03/12/enumuve2.jpg

Sent from my SGH-M919 using Tapatalk

[serial1313]

I just use clipcord with his machines because he has said that he gets a lot more machines back to get new motors that have RCA.

[kbzeeh]

Guess I'm going back to using a clip cord again. But I'm getting a regular cord not that combo piece. What clip cord do you recommend? I need to order a decent one asap. Thanks for the feedback.

Sent from my SGH-M919 using Tapatalk

[Wonderland]

Huh I have two of his machines that I run RCA. Not one problem with either.

[serial1313]

I like Lucky's springless clip cords. If you want them longer that 6' you have go contact them. I think it costs $1 or $2 each additional foot that you add onto it.

[kbzeeh]

Ok thanks I will check lucky's. I was thinking about adding rca adapters to them. But didn't want to take the chance.

Sent from my SGH-M919 using Tapatalk

[nivek]

I have 8 kubins - all rca - all fine. And if you want to sell that adaptor - id take it as I cant seem to find mine for the life of me

[serial1313]

I have never had a problem with any of his machines whether they are RCA or clip cord.

[kbzeeh]

Did you install them yourself nivek? What type of rca did you use?

Sent from my SGH-M919 using Tapatalk

[bretttattoos]

I put the RCA binder adapter from infinite irons on my mc2 and dd and love it. I used a dremel to take off the threads at the top of the screw I used to install them so that I could index the RCA however , otherwise the RCA faces 90 degrees because the machine frame is threaded there and when the threads line up that's how it is. I think there's a thread or two up on RCA adapters and kubin machines.. Not real sure of a good way to adapt the mc max or sidewinder since they are side wheeler style so I'd probably use the adapter cord with those.. Just my 2cents

[kbzeeh]

Thanks for the feedback. I will try to install one on my mc2 first. See how it goes.

Sent from my SGH-M919 using Tapatalk

[nivek]

Message sent

[Heath]

Most people were never taught that if you have electrical contact cleaner, and wipe your clip cord ends off 1x a week with it, you'll be fine with conductivity and will never know the difference between the two. Minus that RCA will not rotate as nice as a clip cord.