martini rotary

[TATMATIC]

anyone see this yet .???? it has adjustable give ....

[slicksteel]

no link!

[TATMATIC]

man i saw this at the convention past weekend ... there is nothing i could find on the web..... its like 2.4 oz and has adjustable give ..... also eternal has a 5.2 oz with adjustable give ... martini said it will be ready forsale in 3 weeks

[Administrator]

Tatsoul is a distributor for Martini machines, no? 2.4oz is feather light!

[The Limey]

2.4 oz really is nothing, be interesting to see what it looks like.

[TATMATIC]

it looks like a mini dragonfly

[Rattus]

is it made in china like the coil machines?

[Administrator]

http://martini-machines.com/index-usa.htm

Site says hand made in Italy but no rotary photos on there. They just joined the site, maybe they can share some photos of what they are offering.

[martini machines]

Hey guys,
we will have an announcement on our website and also on facebook ("martinimachines") on may 31...with pictures
Yes, it is fully adjustable from very hard to butter soft with nice give...available in brass and aluminum
The response from the people who have seen the sample has been very positive so far...
@ rattus : our coil machines are made in italy
Take care,
Andy
Martini machines

[Zapp]

Hey guys,
we will have an announcement on our website and also on facebook ("martinimachines") on may 31...with pictures
Yes, it is fully adjustable from very hard to butter soft with nice give...available in brass and aluminum
The response from the people who have seen the sample has been very positive so far...
@ rattus : our coil machines are made in italy
Take care,
Andy
Martini machines
Sounds pretty good,looking forward to see it !!!!!

[peter clements]

I'm looking forward to seeing this. I've not yet tried their coil machines, but the aesthetics are gorgeous-if they perform as good as they look, well, say no more.

[martini machines]

thanks for the compliment...they perform even better than they look...

[Zapp]

thanks for the compliment...they perform even better than they look...
Andy,show us :-)

[martini machines]

photoshoot is on the weekend....:-)

[tattoopoe]

photos please.

[Administrator]

Looks like the announcement is set for this evening, not sure what time zone though.

[martini machines]

8 pm california time :-)

[martini machines]

Machines are up now on facebook :-)

[hendricksonart.com]

cant find your facebook

[Jaes]

http://www.facebook.com/home.php#!/martinimachines?sk=wall (http://www.facebook.com/home.php#%21/martinimachines?sk=wall)

[hendricksonart.com]

i was putting a space found it

[Davidbautista90]

What's the stroke length on these machines?

[Zapp]

With TAX it will cost 25 Euros more than a ORIGINAL DRAGONFLY !!!! Sorry but who will spend more money for copy with less features then the original ! This concept sounds like a joke !

[Alie K]

Maybe with less parts than the dragonfly, there is less to possibly go wrong wtih the machine? The price tag is what is keeping me from getting a dragonfly. I wonder how well this machine will sell...

http://i52.tinypic.com/156wmyc.jpg http://i53.tinypic.com/spfbl2.jpg

[Zapp]

Maybe with less parts than the dragonfly, there is less to possibly go wrong wtih the machine? The price tag is what is keeping me from getting a dragonfly. I wonder how well this machine will sell...

http://i52.tinypic.com/156wmyc.jpg http://i53.tinypic.com/spfbl2.jpg

The only less parts i see is the needle tensioner !

[slicksteel]

the bearing area and crank look to be different-the dragonfly has a longer crank n the martini looks to have a longer slider it is going run differnet most likely as the bearings etc are bigger. I like the center chuck better as it can be used for leftys. the martini chuck looks like a national one. grip like hell but sometimes a bitch to reopen up. altho i like the finger areas shaped in on the martini to hold the machine while changing tubes/needles.I realy dont like the tension thing would just use t-tech,bands or n runners.
I think most rotary are going this route with the slider/crank springs setup.

o by the way inkmachines are in stock on tatsoul.

[tattooedpirate2]

The shorter the connecting rod the more vibration. It seems like no one can come up with their own design. Everybody wants to jump on the bandwagon and try to produce a rotary tattoo machine. I have 2 new designs in the works after the Treasure Chest and none are copies of another. Originality is the object of invention when it comes to designing a new product. I don't mind the competition it only drives me to produce something new. The Cutlass, coming this fall.

[slicksteel]

I like the idea of yousr cary that you set the machine up a certain way and it stays that way,it is the way to go- just like a coil machine or an artist paintbrush. I think that is the way to go. just like a coil machine-liner, shader and color packer-that is one thing i never liked about rotarys-most builders try to make it one way and make you conform to the machine kind of like useing a coil shader for everything-which most people start out useing then find out the down falls of that-everything looks the same!

[chris-in-cali]

I got to play with one of these at the ink and iron fest.
It was nice....so dam light....with the right disposable, it would literally feel like drawing with a pen.

If I had the cash I would have snatched it in a heart beat.

I haven't had a chance to use a dragonfly or similar rotaries, but this martini rotary was fuckin nice.

[spoonertattoos]

My coworker got the brass one at ink and iron. I used it once and bought it off him in the middle of my session. Right then and there. Im totally a convert. Ordered a bishop too. Its Rad!

[spoonertattoos]

Lined with it today. Its gonna take a bigger session to to really get the feel for it. But I liked where I was headed with it.

[KONON]

http://www.tatsoulspearman.com/store/index.php?cPath=11