DC 1

[daza]

27387
This is my new machine I've working on has adjustustable stroke running a mabuchi ff 130 motor weighs
102 grams
cheers Daza

[Ofeloner]

Looks great Daza,,

[darkness]

always great building and quality , i can daza highly recommend !!!

[ATS]

looks really nice man.. What is the range of stroke and how does it perform with carts?

[daza]

Hi thank your for the comments the stroke is from 2mm upto 4.5 mm as for carts if I'm honest I don't no so carn't recommend them as I'm old fashioned and don't use them myself but by design I don't think it would work as the abar nippel holder is on a bearing which Keeps the needle bar running straight with no side wobble as these take me about three weeks to build I will have one to go out for test but at the moment only in the UK I've been using one for about a month now and I haven't put it down :)

[daza]

27432 2743327434
Just starting to make a run of the new machine these will have a mabuchi motor in them either a FF130SH" and a FF180SH" which will be for cartridge system which is being tested out by Mog of the forum
cheers Daza

[OwlsDen]

Very cool congrats

[ATS]

as owl said mate........ will these be adjustable stroke and be able to push both carts and regular tube/needle set up?
I´m seriously looking fof an EU option...

[daza]

as owl said mate........ will these be adjustable stroke and be able to push both carts and regular tube/needle set up?
I´m seriously looking fof an EU option...
Yes they are adjustable stroke 4 strokes and yes they are pushing carts Mog is testing it out she has posted on hear look up spike in tattoos done with rotary 27435
cheers Daza

[Mog]

Did this lady today, first try shading ,on the 2mm stroke, 7.5 volt, really nice so far , using ttechs, 13cm, 7m, 5rs, 5l. Nice machine :)

[daza]

Wow I knew my machine had potential but F#%k me. Morag you just smashed it out the park how long did that take and any issues with the machine

[Mog]

Thanks! Need to smooth out near the bridge of the nose but do that next time ....
no, no issues, had my regular machine to hand set up in case I didn't get on with it for shading but was really easy to get on with, went in smooth, no redness, worked really nice with round shader which I normally find a pain, so yeah all in all was nice to use! Also lot lighter than it looks! Was bout five hours today :)

[daza]

27499 Just a little up date on the build these two are nearly ready but will have to stop for about two weeks going in for surgery today on my leg so no load bearing on it gutted :((
thanks for the feed back on my machines so far .
Massive thank you to Mog she has now finished her test on the machine and said she will write a review .
Im still looking for someone else to test the machine.
UK only at the moment as the cost of import,export is to great at the mo.
Daza

[daza]

This is just a 360" look at the DC2 this will push cartridge

http://youtu.be/vTNi4wE6TTM

cheers Daza
Don't forget I'm still looking for someone else to put it through the ringer

[OwlsDen]

I would be happy to test it. I am in Germany. I will pay the cost of shipping to and from. And there is no import cost.

[daza]

Pm sent

[daza]

Little video of the DC2 in motion sorry about the back ground can't walk so had to do it in the house lol

http://youtu.be/jJRx15BhzJg

cheers Daza

[daza]

Hi OwlsDen I've sent the machine to you so should receive it soon thanks

[OwlsDen]

Awesome. I look forward to it.

[daza]

27662 27663 Finnish this DC2 machine today aluminium and brass hard wear weighing in at 98 grams this one has the adaptor to fit hawk grips comes with plunger price to forum members £135.00 plus p&p as always if you don't like it with in 30 days I will refund £135.00
Cheers Daza

[ATS]

Finnish this DC2 machine today aluminium and brass hard wear weighing in at 98 grams this one has the adaptor to fit hawk grips comes with plunger price to forum members £135.00 plus p&p as always if you don't like it with in 30 days I will refund £135.00
Cheers Daza
Lovely machine man.. still on my want list! :)

[daza]

2769427695 Just finished these two DC1's & DC2 with adaptor and plungers message me if interested £130.00 DC1 & £135.00 DC2 to forum members plus p&p which I will split with you as always if you don't like it return it back within 30 days for a refund
cheers Daza

[OwlsDen]

Lovely machine. Well worth the price. Good with carts. Better with normal needles. A little slow with cheyenne carts much faster with T-tech.

[daza]

Thanks Gabriel glad you like it and for doing the test on it
cheers Daza

[OwlsDen]

http://tapatalk.imageshack.com/v2/15/03/31/5385e38914cca5326e9fa8287a2578cd.jpg

http://tapatalk.imageshack.com/v2/15/03/31/28e2e7ae1fdb88be65be001dc84ee543.jpg

http://tapatalk.imageshack.com/v2/15/03/31/d0f85a0aa0365c16e13ef655a7bea1bf.jpg

http://tapatalk.imageshack.com/v2/15/03/31/c9a279a75b3fb0be86f6dafb12a23dc9.jpg

It's been a pleasure. Should be on the way back to you in the next day or so.


Sent from my iPhone using Tapatalk

[daza]

That's awesome Gabriel thanks again for doing the test would like to send it out again would like someone in the UK I've got one on test in Norway so as soon as this one is back from Germany I'll let members know
Again thank you to Mog and OwlsDen for testing out the machines

[OwlsDen]

No problem. I will be a little sad to see it go. It is a really nice color packer and a decent liner. I prefer using it with the clip cord as the RCA is a little low for me. Although having both is a nice option. I really wish I got to test it with a large mag. I really felt like it could push a big mag easily. I am sure that when you finalize the design it will be a great machine.

[Seanaskew19]

That's awesome Gabriel thanks again for doing the test would like to send it out again would like someone in the UK I've got one on test in Norway so as soon as this one is back from Germany I'll let members know
Again thank you to Mog and OwlsDen for testing out the machines

I'd happily give it a good few days running if yr interested, I usually do 6 hour black and grey sessions with lots of solid black, so it will be put through it's paces. Just let me know if you'd like me to help and what you want me to do with it.

cheers.

[daza]

27745 The start of a new DC machine

[daza]

27762Mabuchi FF-130sh 14230 Motors for the DC1,DC2 motors on there way

[darkness]

daza machines are very well and thats i have try was very good but to slow for me :( ... but the build quality and the place of the parts was very reasoned -a lot of builder can some learn from daza. I have some 16mm dcx motors here - one on a dc1 to try :D

[daza]

Hi darkness the one you tried had a portescap motor in it which I've changed since then.
this is a mabuchi FF-130sh and the one you tried is a totally different machine to this ,the DC2 has FF-180sh in it but thank you for your nice comments on my build quality

[hellraiser6662]

If you want to pop one in the post I'll give it a try. I'm normally flite v2 and ss dragonfly with t-tech and magic moon/envy t-tech hi-breed carts.. Just opened my own new studio so I can give it to the apprentices as well to have a go on I'm only in Norwich. What stroke are they? I'm normally 2.5 to 3.5. I do a lot of bng, a few colour Japanese pieces.

[darkness]

Yes i knowing , the New mabuchi now is running faster - very good to hear

[daza]

If you want to pop one in the post I'll give it a try. I'm normally flite v2 and ss dragonfly with t-tech and magic moon/envy t-tech hi-breed carts.. Just opened my own new studio so I can give it to the apprentices as well to have a go on I'm only in Norwich. What stroke are they? I'm normally 2.5 to 3.5. I do a lot of bng, a few colour Japanese pieces.
Its an adjustable stroke 2mm,3mm,4mm and 4.5 mm but I can make a cam to suite there are markings on the side of the cam so two dots = 3mm, four dots = 4.5mm it's a mabuchi FF-180sh twelve volt motor running around 7.5 volts for cartridge and six'ish for normal
Daza

[daza]

278162781727818 Having a play made some parts out of copper a couple of bit to change over might make a small run of them :))

[ATS]

Looking good Daza.. that coin gives it a touch of 'Kubinesque' :)

[OwlsDen]

Copper looks good. You know if that adjuster is brass you can soak it in vinegar and it will eat away some of the surface tin and leave the copper and that will make it look a bit more copper.

[daza]

Copper looks good. You know if that adjuster is brass you can soak it in vinegar and it will eat away some of the surface tin and leave the copper and that will make it look a bit more copper.
Nice one Gabriel will give it a try
ATS thanks for the comments all my machines have a 5p piece in them but as this is copper thought I would use a 1p coin to match
cheers guys glad you like the look

[OwlsDen]

No problem. And it is Zinc not Tin. I am exhausted today. But you get the idea. Try 12 hours and heat the vinegar first and add a spoon of salt.

[daza]

Will defo give that a go cheers mate

[daza]

27827Well the brass bits are in the solution starting to turn after three hours looking good so far

[OwlsDen]

Glad I could help

[Seanaskew19]

The copper looks really cool. Adds a fantastic colour to the machine.

[daza]

27981 DC1 with the Rolls-Royce of motors Maxon I only have so many of these beautiful engines so will probably do them as special's

[daza]

2798227983 27984 This is the DC2 with a stunning Maxon power house 6watt 12volt this will push carts with ease I made an adapter to fit on the abar so you can put a plunge in and set to different lengths
cheers for looking Daza

[asA]

2798227983 27984 This is the DC2 with a stunning Maxon power house 6watt 12volt this will push carts with ease I made an adapter to fit on the abar so you can put a plunge in and set to different lengths
cheers for looking Daza
id snag one of these!!! looks sweet

[daza]

asA if you want one I'll make one for you thanks for the interest sorry in the late reply been super busy building DC 1+2 with Maxon motors and in talks with one of England's top artists on this and other machines I build so interesting times ahead

[asA]

Sweet excited to try this out.

[daza]

Sweet excited to try this out.
Hi asA it's on it's way have emailed you the tracking number
hope you like it thank you
kind regards Daza

[asA]

Thanks!!