PDA

View Full Version : Fly Stigma - keeps changing the speed of the rotation


artcore
07-05-2011, 05:53 PM
I just buy a Fly last week, and been having problems since day one. The problem is that the machine keeps changing the speed of the rotation, this is not constant but it hapens often. It can't be from the power supplie because the same problem does not hapen with other machines. Also i tried 2 diferent power supplies and the problem continues(both power supplies are a Tsunami Lauro Paulini) Also the machine have been tested by 2 diferent tattoo artists.
HEEEEELP
Alie K
07-06-2011, 04:02 AM
Have you tried it on different power supplies, artcore?
artcore
07-06-2011, 04:36 AM
I also had the same problem, I solved the Eikon 400, the tsunami had hips
So you teling me that the tsunami is not a good for the Stygma Fly? It is doing fine with other machines. And the Eikon 400 its very expensive
artcore
07-06-2011, 04:37 AM
Have you tried it on different power supplies, artcore?
Yess, one it's tsunami, the other is a old made in china. Strange becouse the same problem does not hapen to other machines :(
inked
07-06-2011, 11:15 AM
the stigma Fly is more sensitive, mines also had the same problem when running with the tsunami power supply it have hiccups., but when i use the eikon es 200 or ems 400, its all good. maybe u can try other power supply to see if it solve the problem
artcore
07-06-2011, 06:18 PM
the stigma Fly is more sensitive, mines also had the same problem when running with the tsunami power supply it have hiccups., but when i use the eikon es 200 or ems 400, its all good. maybe u can try other power supply to see if it solve the problem
Thank you for the tip
I think i have to invest my money in a eikon :/
Administrator
07-06-2011, 06:21 PM
If you do make sure it is compatible with rotary machines. There is only one model they sell new currently that is not.
Venom207
07-11-2011, 08:03 AM
Look into the Kingpin power supply as well. The one with the toggle switch. I've been running one for awhile now with no problems at all. I did have some issues with My Eikon though.
Jack Steel
09-09-2013, 06:51 AM
it's the mass connection of the motor.
fkirons
09-10-2013, 05:22 AM
Make sure you bought a legit Stigma Fly because I believe stigma stopped making that machine. There a lot of knock offs circling around. Just the heads up