Looking for an motor around 7-8000 rpm and 17mm x 25mm

[darkink]

Looking for an motor around 7-8000 rpm and 17mm x 25mm with a shaft that’s 2mm x id guess 5mm


Basically a dragonfly hawk size. I made a self promise to build a rotary after my divorce. need to kill some time. and i have tons of free time. Not looking to spend a fortune and I have searched the site. I truly don’t care if it’s some crap motor like in a rip off machine. This is just for me... to see if I can get it to work.

does anyone have one laying aroun even?


I have the frame built. And drilled


Thanks and please if u can help yell
Thanks again

[OwlsDen]

Look for a mabuchi that fits that. I have some of the ones slightly larger than that the 17x30mm for a project of my own. they are surprisingly better than i expected. Also i got them on ebay.de for about 6€ a pair.

[darkink]

thanks i may go larger. its that i have it drilled out,,,,, and have to pay someone to use their shop to drill :( im looking on ebay now....thanks

[OwlsDen]

FF-180SH is the ones that i got.

[Deakon]

Drilling before you have chosen a motor? Schoolboy error! :)

[Administrator]

Drilling before you have chosen a motor? Schoolboy error! :)

http://dilbert.com/dyn/str_strip/000000000/00000000/0000000/000000/10000/5000/100/15110/15110.strip.gif

[Dan Kubin]

Faulhaber has a motor that fits that spec.. it's $114 usd

[Neo]

2160000 I think is the # of a maxon motor that will fit. Re max maxon motors have another 17 mm diamater and length should be aroud the same. Vat, customs and all the fees make buying a motor a pain in the ass(out of the states). PM me i may be able to help you a little more

[Brian]

I happen to have a few 17mm motors I have no plans for at the moment, shoot me a PM and I'll send one to you for free... The shaft is 1.5mm, let me know if you want me to throw in a flywheel too..

[Jack Steel]

still got em brian?

[jesoner79]

lol i wish i got this much help when i was asking questions about motors well while u guys are at it how about a motor in the same size but about double the torque

[Brian]

still got em brian?

I'm sorry, I only had two of those and never wound up using them in a machine.. I gave one away in this thread and can't locate the other at the moment..
They were good motors but I never had a 17mm bore in a machine as I use a 16mm bore... I have plenty of the Workhorse flywheels though..

[Jack Steel]

I'm sorry, I only had two of those and never wound up using them in a machine.. I gave one away in this thread and can't locate the other at the moment..
They were good motors but I never had a 17mm bore in a machine as I use a 16mm bore... I have plenty of the Workhorse flywheels though..

could you pm me the measurements?:)

[Brian]

Measurements for? I no longer have the motor as I gave it away..