PDA

View Full Version : Dino Cassarin "Bazooka" ..Review...



skinmech
04-19-2012, 12:20 PM
I will try and write this Review without Swearing....But, Fuk, it is sooooo Punchy...With that out of the way, lets begin..

I explained the Volts x Ten = Cycles Per Second/Speed/Hertsz...In another thread, if you haven't read it...STOP...go search and start on that First...

I will cut this Review short...The Machine is beautiful to look at, the balance and build quality is amazing, it is sooo light if you dropped it your ceiling would take a hit....

For Lining, I ramped this with a 9RL to 9.5V's, small adjustment, here or there and off it went...Yep, off it went, I was mearly a bystander , all I did was hold on to it.."See Below"

For Shading, drop the Volts, and put any needle in the tube, and it will do what you want..."See Below"

For Colour Saturation/Packing, well this is where this Fukn Machine shows it's Class....."See Below"



In summation, or to cut it short..If this Machine was a Man it would be Bruce Lee, wearing Muhammad Ali's Boxing Gloves, with Chuck Norris Blood in his Veins, whilst Drinking Scrumpy, and eating a Fukn Pie....Yep it is that Fukn Hard, when I put it down, it asked me outside for a fight...

Great Machine, will do everything, and "possibly" anything, (think Dremmel) I ain't gonna go into Volts for this or for that, keep a steady hand, and providing you know what you are doing, this might just be the most "powerful" Rotary yet,,,,,Think Cranker on Steroids... Lining 10 out of 10, Shading 10 out of 10, Packing 10 out of 10....Should be Rated as over 25yrs Old Only, and with a Pic of Yer Shop..

asA
04-19-2012, 12:56 PM
I'm ordering the two with give end of next week. The give systems look crazy!!! Only wish is they had an RCA version.

skinmech
04-19-2012, 01:09 PM
I prefer no Give, so asA, you will probs have a Machine which will defo work for ya...(Think taming a Stallion) LOL..;)

Bishopbyname
04-19-2012, 03:53 PM
Sounds cool, what are his other Iron Factory machines like? Any pics of this machine?

asA
04-19-2012, 03:59 PM
I like no give machines as well.... So the adjustable one will always be set to hardest I'm sure... And I like the way the spring give one looks!!!!

Barren
04-19-2012, 04:49 PM
safe to say you approve then skinmech :P

skinmech
04-20-2012, 04:25 AM
safe to say you approve then skinmech :P

Most Defo...;)

peter clements
04-20-2012, 07:08 AM
Most Defo...;)

I'm really glad you like it Paul, I told you it was a powerful little bugger. I take it it's now found a permanent home?

skinmech
04-20-2012, 07:31 AM
Oh yeah, already on the top shelf....LOL

The Limey
04-20-2012, 07:59 AM
Oh yeah, already on the top shelf....LOL

Photos or it didn't happen! ;)

skinmech
04-20-2012, 08:20 AM
I don't think the client will be back anytime soon for me to take pics,:o. One thing for sure nothing is gonna need touched up, and no way is any line work falling out..:D

The Limey
04-20-2012, 09:04 AM
I don't think the client will be back anytime soon for me to take pics,:o. One thing for sure nothing is gonna need touched up, and no way is any line work falling out..:D

I meant photo's of the Bazooka lol!

skinmech
04-20-2012, 09:22 AM
OOOOOOPs, here it is, looks are very deceiving....:cool:9393

skinmech
04-20-2012, 09:23 AM
Here is a comparison pic, that Peter took a while back...http://i31.photobucket.com/albums/c363/petetatzon/P1000434.jpg

asA
04-20-2012, 09:33 AM
Wow. So much smaller than the df. Never woulda guessed.

skinmech
04-20-2012, 09:57 AM
Ouce for Ounce, hardest,fastest,punchiest Machine I have came across yet.....I got a Peter Tiegs coming next week, they are meant to have a bit of power, so might have a comparison test...Also have a Hyper V2 on order, but that will be on the sidelines....:rolleyes:

Zapp
04-20-2012, 11:19 AM
I tought it has a steel frame but i research and read it have a ali frame with only 76 gramm !
Hhhmmmmm..........

The Limey
04-20-2012, 11:36 AM
The Tieg hits pretty damn hard so this will be an interesting comparison, thanks for the photos too I'd only seen the adjustable one.

asA
04-20-2012, 12:02 PM
939693979398here is all 3 designs... the spring give looks so tinkery and cool!

skinmech
04-20-2012, 12:06 PM
All versions appear to be built on the same frame, so I assume you could interchange parts..Might have to e-mail the Builder on this one, :D

Sage Oz
04-20-2012, 12:44 PM
Oooooo I wanna get one now....

onechance
04-20-2012, 12:44 PM
cant send you a pm anymore skinmech

Administrator
04-20-2012, 12:47 PM
Make sure when you clear PMs you clear your sent messages as well.

skinmech
04-20-2012, 01:04 PM
OOOOOOps

Bishopbyname
04-25-2012, 05:31 PM
Got my no give Bazooka today, i'm fully booked tomorrow so it'll get plenty of use. Can't wait to see what it can do, been after one of these for a while!

Barren
04-25-2012, 05:46 PM
well im sold ! i thought the df was crazy small !

skinmech
04-25-2012, 05:47 PM
OOOOOOH, this will be a trip Man....You using it for colour, or lining...

Bishopbyname
04-25-2012, 06:09 PM
Probably both. What's it like to shade with?

skinmech
04-25-2012, 06:43 PM
Depends, if you are using rounds or mags, I will assume you are using mags, keep the volts as low as you can,(then trust me on this) increase the volts by maybe 0.2-0.5 and whip in the blends, fast hand....If you go too slow, or keep your volts too low it will be like Packing the Colour in there....I can't give you a specific voltage..I see you have a RW Tag, well think that on Steroids..Getting used to this Machine could be as Hard as Chinese Arithmetic, or as Easy as you want,,,,just watch the Volts and hand speed...Also has a looong throw, so maybe keep well inside tip on mags, and just less than flush for lining..again all depends on Style..enjoy, and it is a trip..

Bishopbyname
04-25-2012, 07:28 PM
Cheers mate, i always start on low volts and ease up from there. There's such a big voltage difference in motors that builders use, i like to err on the side of caution.

skinmech
04-26-2012, 04:44 AM
You need to remain Celibate when using this Machine..........................ie, don't try to Fuk with it, LOL;)