View Full Version : Changing stroke on Neo Tat
Thom Macy
08-17-2012, 03:03 PM
I just bought 2 slightly used Neo Tat machines which I have been pining over forever!
The only problem is 1 is a 1.8mm stroke and I really want/ need the 3.2mm. (or bigger)
I was wondering if anyone knows if I can change the stroke and if so how and where would I buy the part needed?
slicksteel
08-17-2012, 03:11 PM
you can,hit up neotat (ray)on here or at there office or myspace to buy the part-cam lobe/bearing. https://www.facebook.com/NeoTat
ph# 928.473.4185
http://www.taptatdaddio.com/
Administrator
08-17-2012, 05:27 PM
If its a traditional neotat you will have trouble with this since the bodies dont always fit a longer stroke cam, particularly if they are earlier generation original neotats.
TattoosByRob
08-17-2012, 08:45 PM
When you remove the slide bar if there is 3 dots machined into the frame it is capable of holding the longer stroke.....if not bummer
slicksteel
08-17-2012, 09:19 PM
If i remember right the original frame can go up to the 2.5 like rob said there is more metal machined out to fit the bigger cam on the latest ones.
Powered by vBulletin® Version 4.1.12 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.