Changing stroke on Neo Tat

[Thom Macy]

I just bought 2 slightly used Neo Tat machines which I have been pining over forever!
The only problem is 1 is a 1.8mm stroke and I really want/ need the 3.2mm. (or bigger)
I was wondering if anyone knows if I can change the stroke and if so how and where would I buy the part needed?

[slicksteel]

you can,hit up neotat (ray)on here or at there office or myspace to buy the part-cam lobe/bearing. https://www.facebook.com/NeoTat
ph# 928.473.4185
http://www.taptatdaddio.com/

[Administrator]

If its a traditional neotat you will have trouble with this since the bodies dont always fit a longer stroke cam, particularly if they are earlier generation original neotats.

[TattoosByRob]

When you remove the slide bar if there is 3 dots machined into the frame it is capable of holding the longer stroke.....if not bummer

[slicksteel]

If i remember right the original frame can go up to the 2.5 like rob said there is more metal machined out to fit the bigger cam on the latest ones.