PDA

View Full Version : Little question on RotaryWorks



devans
09-25-2012, 02:12 PM
I wasnt sure where to put this question, so i put it hear. I hope its the correct place ????........ But as you get to know me you will realise........ i dont care realy, pmsl.

The question in hand is ....... could you give me an idea what to run a RW on for lining and shading pleas. Mi mate at the shop uses a Hyper now (we have never used rotarys before) and he runs them on 9 to 11 volts, but im dam sure this aint correct for a RW........... And lets face it.......... this is the baest place to ask :) .

Hi Blue :o

skinmech
09-25-2012, 02:29 PM
http://www.rotarytattoo.com/forumdisplay.php/47-Machine-Voltages-* Good place to start, also, is it a 6V or a 12V motor that you have,,,,,P

devans
09-25-2012, 02:50 PM
Blue....... help me.......is it a 6 or a 12v

devans
09-25-2012, 03:05 PM
By the way skinmech.......... that link helped loads,,,,,,,, much thankyou :)

bluerocker
09-25-2012, 04:56 PM
Hi dev lol, run me 6v around 2.5 to 3.5 for everything and the other one around the 6.5 to 7 v running on a cx-1
They are powerful machines so the smallest adjustment of volts will make a large difference to the speed but universal to do it all!!