PDA

View Full Version : Hyper v3 Give/volt settings?



ccoppola
01-15-2013, 11:37 AM
Just picked one of these up. Couldn't resist the temptation. Anyway...I am curious what others have had luck running via give/voltage combo for different techniques. I actually put a dot of nail polish to mark the "give" screw so I can tell how many turns I used. Thanks in advance!

serial1313
01-15-2013, 12:45 PM
I ran mine @ 10 volts w/ 1 turn of give out from totally tight.

joelhague
01-15-2013, 02:20 PM
I do the same thing with the dot but I use a paint pen I wonder if nail polish would hold up even longer I did this on my halo as well

MickWrath
01-15-2013, 04:26 PM
I run my V3's between 8-9.5 volts depending on what im doing and adjust the give screws accordingly as well. All feel, just like you do with a coil, adjust as you need to dont try to limit yourself in a fixed spot.

vodu
01-15-2013, 08:06 PM
in the site you find the cps - volt - give -stroke infos in faq...i use mine to line 10-11 half turn and the rest depends what i´m using 8 - 10,5
http://www.stigma-rotary-tattoo.com/index.php?option=com_content&view=article&id=109&Itemid=105