2 new Machines from NO IRON MACHINES

HELLO GUYS, i come out with 2 new models, take me long time becouse im alone to done this stuff, and i wait i have all the machines assembled and ready to ship before post something, , i gonna discount 50 USD on the machines for FORUM MAMBERS and Worlwide Shipping inlcude in price too, with Register Air Mail
i upload all the pics on the FACEBOOK page, and in this days i gonna put all on website for the online sale, gonna put on website also all the models of my side project XXX IRONS, my hand made productions, so they all gonna be available to buy on www.noironmachines.com

here the first model, is the evolution of my oldest rotary so i call REACTION, is available in many different COLORS-GRAPHIC and mostly are 1 OFF
u can see all on this page:

https://www.facebook.com/no.machines...8514414&type=3

SPECIFIC:
-Aircraft Aluminium frame, CNC cut from a solid block
-Custom 12 v motor
-New Pivot Give System, 4 hardness including for
different setup:
-Orange, soft
-Grey, medium
-Yellow, hard
-Black, extra hard
-New Brass, this pivot is solid brass, add weight to the slide and create a very strong hit, just wrap small piece of tape around until find the perfect size for your machine slide

-Linear Motion with Delrin slide, self-lubricating
-3.4 mm. standard Stroke
-Lateral Guide, keep the rubber bands always in the correct position
-Clip cord and RCA contacts booth on the machine
-Positive Contact mark with Red washer, please for the safety of the motor connect your clip cord correctly
-Sty up Spring, help the needle stop inside the tube
-Zinc Plated Screws, Rust proof
-Easy Tube Vise, great for disposable or steel tubes
-Less noise, less vibrations, no tuning
-Anodized colors frame with special Graphic
-100 gr weight ( 3.52 oz )
-Recommended Usage Voltage: 7 to 10 volts
-The machine push easy Needles Cartridge from Cheyenne and T-Tech, starting at 8 volts
-12 Months Warranty on all Parts, Motor include
-No need use grease on the slide, only some drop of Synthetic Oil on the Bearing, visible under the slide
-WARNING, NEVER RUN THE MACHINE UNDER 7 VOLTS AND
OVER 12 VOLTS, THIS IS VERY IMPORTANT FOR THE SAFETY
OF THE MOTOR

here some more GRAPHIC

here the second model name SHIELD, obviously the idea of the NEEDLE CLIP is take from NEOTAT....

SPECIFIC:
-Aircraft Aluminium frame, CNC cut from a solid block
-Custom 12 v motor
-Linear Motion with Polizene slide, self-lubricating
-Needles Clip Slide, grap perfectly the needles bar without using any rubber bands
-No Give
-3.4 mm. standard Stroke
-Clip cord and RCA contacts booth on the machine
-Positive Contact mark with Red washer, please for the safety of the motor connect your clip cord correctly
-Sty up Spring, help the needle stop inside the tube
-Zinc Plated Screws, Rust proof
-Easy Tube Vise, great for disposable or steel tubes
-Less noise, less vibrations, no tuning
-Anodized colors frame with special Graphic
-98 gr weight ( 3.45 oz )
-Recommended Usage Voltage: 7 to 10 volts
-The machine push easy Needles Cartridge from Cheyenne and T-Tech, starting at 8 volts
-12 Months Warranty on all Parts, Motor include
-No need use grease, only some drop of Synthetic Oil on the Bearing, visible under the Slide, and around the Slide too
-WARNING, NEVER RUN THE MACHINE UNDER 7 VOLTS AND
OVER 12 VOLTS, THIS IS VERY IMPORTANT FOR THE SAFETY
OF THE MOTOR

here

more GRAFIC

Price is:

-reaction- 320 usd - forum members- 270 usd
-shield- 300 usd- fourum members- 250 usd

They look great! I love the RUN DMC machine!

Ha ha,..thanx....

I like the look of those, nice no nonsense machines....Sometimes less is more...;)

Thanx....