-
Making a dd
Well I thought I would make a dd today as my car needed it's breaks bleeding so while I was at my workshop I made thishttp://uploads.tapatalk-cdn.com/2016...e88de89f5c.jpg
Not the easiest thing to do in a workshop made for making motorbikes and stuff every thing is to big.. but I gave it ago. Motors from some crap Chinese rip off jack hammer, cam is off eBay for 2.99 and the rest is metal I had about. Works well but it's not hard for a dd but the way it tattoos I now thinking why do we pay for such high end machines? Do we over engineer things now? Or is it just gimmicks ?
-
Definitely! The more over engineered the more money that can be extracted :) Tried the exact same thing yesterday afternoon, was stumped by a handmade tube vice and a shite pillar drill , so a massive temper tantrum was the result here !! May come back to it when my will power returns!
-
I built this i use it all the time. Cost me about £40 to build and works as good as any machine iv used. http://uploads.tapatalk-cdn.com/2016...eb814d6eee.jpg
Sent from my SM-G928F using Tapatalk
-
I also built this in my garage where i work on motorcycles haaa
Sent from my SM-G928F using Tapatalk
-
1 Attachment(s)
Here is one I made. I have made a bunch. I keep them for myself.
Attachment 29586
-
How do you sort the cams out .. the ones of eBay are cheap at £2.63 shipped. But I think it's about 2.5ish. Would be good to have 4mm or even adjustable. .
-
I tattooed a guy in a machine shop and he made a few for me. Mine are 4.2mm. However I think Nedz sells some adjustable ones for about 20€
-
All depends on the output shaft size. Neds sells adjustable cams. HM adjustable cams look good but they dont sell them.
Sent from my SM-G928F using Tapatalk
-
Dale at rotary works sells them as does this fella http://www.akart.co.uk/page16.html
-
Looked on nedz site and couldn't find any. . But akart might be a good choice ..
