Bishop Magi cam/bearing seperation

I was just curious if anyone else has had an issue with their cam/bearing separating from each other during use. I was pulling a line with mine today, at 9.5v, and it just popped apart. Just curious if this is a common problem or if its a fluke accident. I feel like my machine has a curse on it though:rolleyes:. First the name badges randomly fell off and now this happens. I might need to bust the sage out and have a purification ceremony on it. Any input would be great. Thanks in advance everyone.

Im flite has done the same thing. The cams are very simlar. What i done was use a little super glue or you can use a bearing fix to hold it in place. Carefull you dont get the glue into the bearing though.

Sent from my SM-G935F using Tapatalk

use red loctite , it's pretty strong to hold , not normal super glue or you'll never be able to seperate it again

My flite did it also, same kind of cam. Contacted inkjecta, they didnt reply to email but got a new cam in the mail next week.

I did find the bearing size in the uk and now i just replace the bearing and its only £3. If you have some of the 1st flite cams they have the centre out, so popping the bearing out it easy.

Sent from my SM-G935F using Tapatalk