Printable View
My boss recently purchased an aluminum Swashdrive Gen 6 off ebay and for some reason its been making almost a fast ticking sound while under load. The noise seems to be coming from the top end of the machine, around the bearing. He uses it as a liner and runs it around 10 volts. Anyone have any ideas on what the problem could be? The perfomance seems to be unchanged, but the sound is driving him nuts.
I had the same issue with my gen 6 n after taking it all apart , my noise seems to b coming from the motor. Other than sending it swash to look at the problem, u might need to get a new motor. Some forum members posted some suggestions on here.
Could be just the bearing. I would suggest replacing that first with a ceramic bearing and see how it does. That's way cheaper than replacing the motor.
Drop a line in the swashdrive facebook group. Samyo and Tony are in there daily and could probably answer this officially.
Thanks for the input.
Thanks EVL .. we do our best to be there daily .... I think we may be in the process of getting this sorted .... apart from checking everything is tight, it is difficult to diagnose without seeing it or having it in my hands .. they are a pretty reliable machine & there is only a handful of things that go wrong ... the gen6 has a couple of smaller bearings & it also depends what sort of Gen6 it is .. there was a change made halfway through that series ....Quote:
Originally Posted by evlink2006
The other thing that might be of interest is we have just finished testing the prototype Gen8 & have been playing with the first production models ... they really rock & are going to make some folk pay attention ... the Gen8 will have a bigger motor and an adjustable give clip, that goes from feather soft to rock hard with a very simple mechanism. It also has a couple of other surprises but I will save that for the photos ...
Samyo
Swashdrive
Hell yeah! Ready for the gen8!
Gen8 Gen8 Gen8!!!!
Got it taken care of, Thanks again.