The Rotary Portal

Peter clements
I buy these machine 3 days ago.
Can you line with this machine?
I do some color job, and it´s very easy to saturate the areas.
how many volts you run?

thank´s

Quote:

---

Originally Posted by tatoo-kid

Peter clements
I buy these machine 3 days ago.
Can you line with this machine?
I do some color job, and it´s very easy to saturate the areas.
how many volts you run?

thank´s

---

I lined with it today as a matter of fact, a guy with tough skin,so I ran it at 4volts. This machine's a good little liner in my opinion, and you say you've been getting good colour saturation? The conclusion here is it's a very good machine at the price, and no surprise that they are selling well.

Quote:

---

Originally Posted by peter clements

I lined with it today as a matter of fact, a guy with tough skin,so I ran it at 4volts. This machine's a good little liner in my opinion, and you say you've been getting good colour saturation? The conclusion here is it's a very good machine at the price, and no surprise that they are selling well.

---

I try to line with them, but with no good results, the lines don´t get black and solids...
yes, I try to color with 9 magnum, and seems to pack the color very easy.

Quote:

---

Originally Posted by tatoo-kid

I try to line with them, but with no good results, the lines don´t get black and solids...
yes, I try to color with 9 magnum, and seems to pack the color very easy.

---

Last job was a celtic circle design on a shoulder cap, 5 needle line @ 4 volts, crisp even lines like a knife going through butter. Tell me how you set up exactly, needle protrusion,voltage,what black are you using?

Quote:

---

Originally Posted by peter clements

Last job was a celtic circle design on a shoulder cap, 5 needle line @ 4 volts, crisp even lines like a knife going through butter. Tell me how you set up exactly, needle protrusion,voltage,what black are you using?

---

I try with 7RL needle 0.25, in a disposable tube.
Use Kuru Sumi lining Ink, I also have eternel lining Ink but I don´t like.
I try to run in 3.5, 4 and 4.5.

Quote:

---

Originally Posted by tatoo-kid

I try with 7RL needle 0.25, in a disposable tube.
Use Kuru Sumi lining Ink, I also have eternel lining Ink but I don´t like.
I try to run in 3.5, 4 and 4.5.

---

I prefer 1" steel grips, especially with such a light machine, it will give you forward balance and negate the tendancy to press against the skin,if you like disposable stuff simply do it with the tip, that's something else I do. For 7s I would say you are right to go between 4-4.5 with a steady not fast,handspeed. Kuru Sumi is fine.

Quote:

---

Originally Posted by Deakon

Very nice idea, and it doesn't damage the threads? I'll try it out. Thanks for the heads up.

---

Here's the pictures...
http://i31.photobucket.com/albums/c3...taries0034.jpg

http://i31.photobucket.com/albums/c3...taries0035.jpg
http://i31.photobucket.com/albums/c3...taries0036.jpg

I have looked at these machines for a long time. Anyone know the price shipped in us dollars?
Also this world is a good machine if u were using the t tech system...You could leave the plunger in place….Which I’m switching to...


would love to see work done with this machine

Yea the t-tech system is dope would work for this,I just fill like FKI-Gaston said about the stinger that this machine was put together with not to much after thaught,you should not have to slot the screw,cut the bar or change the top clipcord mounts like so much people are doing to make it work for them.Also the chuck is just like the stingers.Also the finish looks realy rough and needs to be polished/smoothed up.
This machine needs to go back to the drawing board for much needed major revisions and updates as found out by tattooers.Then it would prob be a jem!

price with shipping is 215.00 in the states

Quote:

---

Originally Posted by peter clements

I prefer 1" steel grips, especially with such a light machine, it will give you forward balance and negate the tendancy to press against the skin,if you like disposable stuff simply do it with the tip, that's something else I do. For 7s I would say you are right to go between 4-4.5 with a steady not fast,handspeed. Kuru Sumi is fine.

---

I will try your set up, and this time with a five round liner.
I like your idea of the slot, I will also do this.
I use plastic because is disposable, later I will buy a good autoclave to work with steel grips and tips.
You like the machine for shading?
thanks