Sorry Jay had a hunt thru the spares and couldn't find one I'll keep looking and let you know if I manage to find one
Printable View
Sorry Jay had a hunt thru the spares and couldn't find one I'll keep looking and let you know if I manage to find one
Attachment 5531so this is what I need, Attachment 5532here is the diameter of the shaft
by all means I do not want a cheap on.Quote:
Originally Posted by OwlsDen
It is a small bearing. Looks interesting in the picture, like it is flanged at the rear. Convert the shaft size to metric, 1/10th inche is 2.5 mm I believe. The is your inner diameter. So 5x2x2.5 = 5mm outer diameter 2mm thick and 2.5mm inner diameter. Hopefully you kept the c-clip that kept it on.
thats the ting it did not have anything holding it on.. I have 2 of the same machine and one was just loose i will post a front picQuote:
Originally Posted by OwlsDen
its press fit on. getting it on the post will require you freeze the post and the cam. when you press fit the bearing on it will slowly heat up expand and hold.
Freeze it as in spray the heck out of it with compressed air? Or simply put it in the freezer?
Putting it in the freezer will usually do the trick. A little locktite can also help but you will never get it off.
My good man do you have the bits if so send them to me I can make a few for you with the bearings on them for you let me know ???
yes actually I have one that is complete, I will throw it in the mail to you..thanks dale. I cant wait to try you direct drive machine that I got thru the group buyQuote:
Originally Posted by rotaryworks