sweet then ill get some extras,thanks a bunch...smileyQuote:
Originally Posted by asA
Printable View
sweet then ill get some extras,thanks a bunch...smileyQuote:
Originally Posted by asA
i should have about 6-7 ready in the next 2 weeks. soft or Hard, i would just need to know what colors and type you want so i can build to suit.
i placed an order for more motors and it should be arriving in a week or 2. i have a few frames finished,anodized and ready to be assembled.
i should have another 15 ready before the 15th of Nov for the Richmond Va tattoo con.
if anyone is gonna be out there and wants to try it out just send me an email.
[email protected]
this is still a very small operation im running. the machines are cnc milled by a local shop here in chicago. i do the polishing/anodizing and wiring in my studio.
im glad everyone that has purchased a machine so far has been happy with it.
@Tkocevar1
i can customize your hawk as much as you want i can only do 4mm stroke for the time being. since its the only length i set up with my machinist.
i can just switch the cam out for one of mine for $50 but if you want to commit and crack it open it takes a bit more work lol. i can powder coat the grip and housing a few different colors. like this--->
Attachment 14159
Yesssssssss I seen that on Facebook. I got a standard grip for it19mm would it be tough to make it bigger diameter?
insure i can make it happen :)
Well me and you will be doing some business here soon. Btw I got to bust my new machine out packed some color on one of my co workers. Works like a charm man. That white machine looks so bad ass btw
does the soft one only do soft, or can it do soft and hard?
@Tkocevar1
Thats awesome! glad you like the machine man.. That white machine is my baby right now, i think ive only used it a few times lol
@sleezy23 the soft machine only does soft. the system works similar to a spring on a coil machine but is backed up by a brushless motor. i like using it for portraits and softer stuff.
Here is a piece done by Cris Gherman Out of Dublin. Done with a Stylus H(red flower and bud)
https://www.facebook.com/CrisGherman
http://www.crisgherman.com/
Attachment 14224
Hi, I love my thunder most for lining and packing but after reading that, I get shocked. This machine seems to overpass the thunder. How do you compare the stylus with the thunder in fine lining, one pass power lining, etc? I it would be a fair comparison since both are cartridge dependent, quiet, and pencil like compared with other machines.Quote:
Originally Posted by asA
My thunder just fails more when using on fatty skin like belly or elbows so I have to change to a bavarian custom coil. I guess that since rotaries pinch in a different way of coils ( less instantaneous impact) they are not so able to enter the skin as easily, instead just push it a little before it enter.
Is this a rotary machine or it uses a system like a doorbell ( I experiment myself with a doorbell mechanism and I guess is the system used in the LOD machine )
I haven't used a coil in forever, so I can't really compare. The stylus works perfect for me.... From single needles to 13r shaders it makes solid one pass lines. The stylus is a direct drive basically. I'm super curious to try the soft machine as I only have the hard version.Quote:
Originally Posted by thejackco
Asa what voltages are you using. Lining ,packing, bng. Just wondering
Pretty much settled in at 10.5 volts for almost everything maybe 11.5 volts for big liners and bigger mags.
Stylus Machine Web site now ONLINE!!
www.Stylusmachine.com
I am currently sold out of the stylus machine!!
It sold out much faster than I could have anticipated.
I also received some great reviews from some of the new owners!!
New Machines should be in stock through the website in 2-3 weeks..
Thanks to everyone on the forums for the support!
Attachment 14438Attachment 14439
Ok I've waited long enough how can I pay in advance i been outta loop on here i pm me you i want two i can pay right now! Ill message you my number.
They are worth every penny if your a fan of the hawk^
I have had mine for a week and I am still putting the machine through its paces as I get uses to it. I will write a full review once I am confident that I have adjusted to its differences from the Hawk.
Does this machine work the same way as the Marksman with a cog, wheel and shaft system?
If you check out the one offs that Rick did on the Stylus Facebook page you can see how it is setup. Direct drive with a clever bend on the plunger arm to keep it compact.
MOTORS ARE IN!!
I WILL BE TAKING PRE-ORDERS THIS WEEK.
Machines should start going out the door next Tuesday!!
Order online @
http://www.stylusmachine.com/#!store/cwvn
OR
contact me @ [email protected]
if you need any details on ordering, shipping or payment
I cant preorder online so Paypal info so i can buyQuote:
Originally Posted by Stylus Machine
Nevermind got it!
hey man i saw on your site the stylus soft is now listed is that one available now or available soon or what?
Any good news?
Machines are set up. My parts for the pushrods were returned to sender on monday. Hoping to get em Friday or sat to ship em out next week.
This is exactly why I don't like doing pre-sales, I hate making pole wait.
when can order one?
what voltage is everyone using for there stylus H, mine needs bump start lower then 10.2 volts , this is on a eikon ems 400, tested on another supply it is the same result
sounds no bueno. check the rca cable?
13volts
The rca is fine. But ya I used mine on 13 volts and it was better I think its just a lot different getting used to a direct drive o expected the no give in this machine to perform just like a vivace of capo but it has a much different feel on the skin softer almost
rick gave me some advice on that. he said he runs his constant, no footswitch. run it and then insert the cartridge while its running. i started doing that again and havent had any problems. also, a lil A&D on the ball will lube it up and possibly help with your problem. i started lubing mine and running constant, and havent had any issues since. i use mine on almost every tattoo now! cheers- Eric
it sounds like the hawk thunder PS would work great on these.