what machine is that that you got the smaller grip hooked onto? fuckin nice man
Printable View
what machine is that that you got the smaller grip hooked onto? fuckin nice man
thats an aluminum rotary works (12volt motor)..I re-covered the motor and had the frame hand engravedQuote:
Originally Posted by andrewc
Those silver grips sound great. I will have to search out some.
Disposable ones are the winner! But now you are limited to their needles. Its always something!
with the plastic disposable ones you can use either hawk or T-tech cartridges, you just have to modify the drive bar. I bought about 2ft. of 3/16" delrin rod and made my own drive bars out of regular needle bars...Quote:
Originally Posted by fkirons
the black cartridges only work with the aluminum tubes and the tubes are autoclavable...
Love the tubes, tempted to design my own mwwaaahhhahaha
Make one that works with all of the cartridges. I'd buy it.Quote:
Originally Posted by fkirons
so in your opinion which would be the best ones to go with here? the aluminum ones are claiming to be the best ones except for the hawk ones (at least theyre being honest in their opinion of it) or the t-tech or the other disposable ones you have?
it depends on what your looking for. If you have a hawk (spirit or thunder) and/or use T-tech and want a disposable option, then I would stick with T-tech's or hawk cartridges and look into the disposable tubes...If your looking for the cheapest way to use cartridges on any machine other than the hawk and marksman, I would go with the aluminum tubes and black cartridges..so far I've done about 12 tattoo's with the black cartridges and I've had one bad cartridge (hooked needle on a 5 RL)
oh and if you prefer bugpin needles, i would stay with T-tech....
How much will cost to send those samples to Europe?Quote:
Originally Posted by fatcashdaddy