josh that tattoo is fucking sick
Printable View
josh that tattoo is fucking sick
is amazing
have some one get and try STIGMA Rotary BIZARRE V2!!!
Im Impressed and so glad that the Centri is so useful.
one to watch been looking smooth soft shader for different applications.
Update: aluminium frame looking sweet :D , the overall weight has raised a bit, not much, the stroke is fully adjustable on the machine aswell with the power supply, rca/ clip cord check, one inch shorter check. I'm getting excited! I would say 4-5 weeks if not sooner!
Exciting news indeed and looking like a potential market leader at the moment. I'm definitely going to be looking out for updates on this machine!
How would you say the Centri performs as a liner?
Well my opinion is alittle biased, but as liner or shading I love it both, now you can adjust the stroke on the machine aswell so its limitless
and what is it costing for these new additions?....it sounds great.
For you Elbo, just your leg, if i take your arm i would feel bad. lol jk, im adding it all up and should have a good figure by next week, It will be the same if not cheaper so...
Hey Merkey, I agree with you about big names and the Neuma. I originally bought a Neuma because of the work I saw being produced with it.For everyone else. As far as cost goes, that's the way it is with manufacturing. The less you make the more it will cost. If I were to make "one-offs" of the Intuition they would cost between $940- over $1200 EACH! As a matter of fact I have done that over and over again while refining the design. $600.00 isn't that bad, it's quite inexpensive for a one-off of a new product. Unless he had 35-50K to dump into production, and purchase 500 or more parts at a time... You just couldnt produce a cheap machine. By the way you have one year to file a patent after you have shown the design. A patent is very reasonable also (I personally have 6) so sell a couple machines and get one. It will give you more options when it comes time to further your company. You can PM or email me about getting one. I have a great patent Attourney. So you go Centri, do your thing good luck!
The patent is not the expensive part. What's expensive are the lawyers and the risk of maybe losing a case after years of fighting it and spending thousands!
I like the look of the mini one I saw on the site. Good Job
Thanks, I appreciate that.Quote:
Originally Posted by fkirons
so glad i keep my air set up....
that is nuts..good looking machine
yep, i agree, do charge cheaper bud. im sure it snap up faster. I like what i see now, smaller footprint, and easier rubber positioning.Quote:
Originally Posted by Cyberitual
I'm really interested now that its shorter too. I might have to sell my martini rotary so i can pick on of these up. I cant remember these are in the 500 dollar range right?
even though you shortened it up u might want to put a 90degree down on the rca. having it staight add another inch back on the machine......hard working on neck shoulder area like someone mentioned earlier.
You could always buy a right angled RCA plug.Quote:
Originally Posted by bmerck11
Can/could I be put on the list for next batch?? Would love to try this out and I WILL post MY thoughts, opinion and results.
Thank you,
sure thing
I've read though some of the posts and questions about this machine, although I'm in no position to answer a lot of them, over the weekend I was able to check the machine out first hand. A friend and artist was doing a tattoo with one and let me get behind it for a few minutes to see what it'll do. My only regret was that I didn't get to do more then I did with it! "Someone" mentioned size being an issue? I thought that also, from looking a picture of it..once you have it in your hand though, it's a whole different story...you literally think you are drawing with a large sharpie. From what I understand the next generation may be somewhat smaller? Again, I may not be in the best position to comment on this because I don't know for a FACT that a downsize is in the works. As far as what I actually experienced though, this machines could very well be the future. I've always been a purist when it comes to machines and have stuck with coils, BECAUSE there hasn't been the ability to adjust the needles force. It hasn't been a matter of which is better, but just the plain fact that the technology wasn't there yet. Machines like the Dragonfly (just to name one), have changed this somewhat. But the Centri changes EVERYTHING...the technology is finally there! I personally don't like the way it looks, I don't like the size, I don't like that it doesn't come in 85 different colors... bla, bla, bla...all that makes no difference, one the first things I did this morning was message the Builder asking if I could get a pre-order, name on a waiting list, who's d*ck do I need to suck...whatever it takes to get my hands on a couple of these! Needless to say, I'm very impressed with their product...
Wow, that's some testimonial. How long is the wait for one of these?
Quote:
Originally Posted by Inkslingers
I couldn't personally tell you the wait time. I was told today that they took a month set back waiting for parts. I'd go to Centritattoo Machines on facebook on look for postings there.Quote:
Originally Posted by Bishopbyname
Virtually nothing on the Facebook, no info on the machine, there isn't even a picture of one. I'll contact him on here.Quote:
Originally Posted by Inkslingers
Try this link on facebook if you want pictures..."Centri Tattoo Rotary Machine"Quote:
Originally Posted by Bishopbyname
Fixed it so your link is actually a linkQuote:
Originally Posted by Inkslingers
Ok, so ive been having many inquires as to when the next batch will be ready. This is were i stand as of right now, My previous manufactor decided i was not a big enough contract so they decided to put my project on the shelf. One whole month went by before they had the balls to tell me that was the case. So basically i lost a month of production to the government. Since then ive found a new manufactor for my components and ofcourse they have lead times aswell. It will be 4 weeks from now till i see all of my components. So in 4 weeks i will be in the assembly state. Should take me about 5 days to assemble the whole order. I can only afford to make 50 of them at this time. Alot of people are wanting to be put on a waiting list. That is fine, but you would have to email your request to [email protected] and include your full name and shipping address. As for pre-orders i would love to take them, but are you guys willing to pay and wait that long?
If i did pre-orders and i recieved 50 at $300 each "which is half of the full price" like in 2 or 3 days that would greatly speed up the process. But i cant really sit and wait for those pre-orders to come in. Trust me, Im trying to get these out as fast as possible, but its hard when you have to rely on others. It really puts me in a position where i cant promise a shipping date untill i have these in my hands.
This batch will not have 85 different colors unfortunatly, lol I can only afford to produce 50 right now hehe, So these will be all annodized black. After all 50 sell im hopeing to have a list of favorite colors that people request so that the following batch will have all those choices in colors.
Im sorry for the lengthy lead times im having to deal with. I hope you guys are understanding and can be patient with me here. Its hard to start a company with no capital.
The new Batch upgrades are: Aluminum body, Adjustable stroke, and clip cord connections. New size in total length = 3.635 inches.
Attachment 4208Attachment 4209Attachment 4210
Thanks for all your support!
Cool, post a link in the product announcements area when you have a batch ready to sell. :)
Glad you found a replacement for the guys who left you hanging.
I'm sure it'll be worth the wait mate. I bet it's a nightmare waiting for other people and having matters taken out of your hands.
VERY MUCH SO! Its ok once i get this batch out, this company will be on a roll.Quote:
Originally Posted by Bishopbyname
I'm hoping I post this correctly with pics ..... I've been using 2 centri machines for about 2 months now and can't believe how amazing these machines are....... I've had a hawk spirit, dragonflies, swashes, bishops, and tons of coils and nothing in my opinion can do what these machines can. There is reduced pain during the tattooing process, customers swear it, healing time is greatly reduced with very little trauma to the skin.... I realize I'm no superstar sponsored artists and my opinion might not mean anything... But do yourself a favor and find away to try one you will be sold I have posted pics on centri's Facebook page if you would to see some of the work Thanks Bill
no pics
Sorry bout that I suck at this posting pics thing....... Check out Centri tattoo on Facebook I some how manage to post on his sight.... I'll try this again when I find someone to help me out. ( kind of computer stupid we just can't get along ) check back later today I'll get this right one time
Attachment 4231Quote:
Originally Posted by tattoosbybill
Attachment 4232Attachment 4233Attachment 4234don't know if I got that right...hope this helps you...Quote:
Originally Posted by tattoosbybill
looks like all aspects of tattooing can be achieved with it.
thank you