Printable View
so I'm def a neotat fan, except for one lil thing, the plug, drove me crazy to switch cables during a tattoo (i jump back and forth between 3-4 machines during a tattoo) so I decided to mod it , I removed the base, took off the lil jack and put a couple binding post and now....tis no work.... I noticed the mini jack had a secondary wire attached to the neg....am I missing something? any help would be appreciated
call ray at neo tatt.
Ray has several Neotat sites. I think that one of them [maybe taptatdaddio?] had a pdf on machine maintenance somewhere in there. Perhaps there is a bit on the wiring? I know he is super busy trying to keep up with orders (Eikon keeps selling out of them, and he is racing to keep up with demand), so don't be surprised if it takeks a while to get back to you. He doesn't ignore emails, it can just take him some time.
If I remember when I get to work (yeah - on Easter - boo) I'll unscrew the backplate on one of my machines and see what I see (might be different, as I had Ray send me backplates with both clipcord and rca).
I'm not sure what you've done if you look at Rays RCA mod the picture shows two wires but there are 3 pieces of heat shrink... send him a pm or email and I'm sure he'll help you out as soon as he has time.
http://www.neo-tat.com/oscommerce/images/NMC-RCK.jpg
I think the other piece is to cut in half and put over the motor connect ends.
Thanx guys, it is only 2 wires, so it didn't make sense to me that it didn't work, how do I know if I burnt out the motor os seized it up, it won't budge now even if I manually try to spin it, this blows , it as one of my dailys
...unless you soldered the wires to the wrong areas? Maybe it's a polarity issue? Maybe the motor is the variety that won't turn unless there is power going to it?
Took the motor out of the case comPletely , tried the clipcord in different polarity position, nothing.....fuck!!! Was going to post a pic but I'm on my iPod
it might not be your clipcord polarity - I thought maybe where you soldered your red/black from the motor to the rca might be off. If something is grounding that shouldn't be, yeah - maybe that's your problem?
What if you opened up your machine again and took some close pics of the wiring and where you have everything soldered - on both the motor side and the the inside of the rca attachment?
cant see were to post pix, opened up the case again, removed everything and basically had a motor and 2 wires, put my clipcord end directly on the motor ...no dice...what is bugging me is that im not sure what i did wrong, and i want to get another motor, but worried that imma burn that one out too...
Alie k, u have a personal email i can send pix to?