Printable View
Just picked these up.
got some questions on the rapier.
Is it a rapier II or just a 1?
There are 2 screw holes were the crank arm joins the motor. Is that for different strokes? It looks like it might change it a little.
http://i133.photobucket.com/albums/q...51-55_54-1.jpg
How does the Paco run,,,looks like a Med stroke set-up, but could be the angle of the pic...
I didn't really pay much attention to be honest.
Looks like the stroke on the rapier is currently about 4.5mm.
If it is one of the long stroke rapier 2's I would say it is 4.2mm , but the vice looks different than my rapiers, so maybe it is a first edition. Do you wanna get rid of it?
I've been told is a 1/2 hybrid and does have 2 stroke options just by moving one screw.
Must be something like 4.3 and 3.2.
Seems pretty cool.
Dont think I'll be selling it..... well not yet anyway.
Ha cool if you do lemme know I have a lot to trade with and would definitely buy it that day!
as far as i can see from the pics the back end can is the rapier1 with updated rca,the the front slider/chuck frame housing is a rapier1 the bottom crank shaft attacment is a newer rapier 2.
The original chuck/vice slider does not have a back hole in it-the screw went from the front end-the frame had a shorter front end-cary has used two different front front nuts -one looks like a lrage tophat the other is the contactscrew nut you would see on a fki coil machine. That looks like a aftermarket vise know like nedz sometimes use.
I have had a bunch of rapiers so this is based of this and talking to cary for a few hours.
Had chance to have a go with it over the weekend. Left it at it's longest setting, which is about 4.2mm.
My initial setup with a needlerunner on a 0.32 7rl bogged the motor down a bit and had to run it at about 8v, so I re-bent the needle a little less and it ran nice around 6.5-7v.
Have to say I was instantly impressed with how nicely it lined. I look forward to trying it on something bigger. :)
Cary has the TC crank on all of his rapier machines now. You can change the stroke yourself now by removing a screw i think. I paid for one a few days ago and i cant wait to get it but dont think it has shipped yet lol :):) *edit* Oo it shipped and i get it tomorrow !! Sweeeeeeeeet
Great guy who will stop what he is doing to help you learn about his machines and answer any questions you have. His service is top of line and you cant beat it. Im sure his machine will beat all others as i went through many rotary machines, cant wait to try this one for lining, shade/blend. If it runs great they will be my everyday machines and i will not be spending almost double the price on another rotary ever again. I'm sticking with the pirate from here on out :):)
Wonder if that's what it's got. It had recently been serviced by Cary and I can adjust it from 3.somthing to 4.2
It may be , it depends on how old it is. I know he said all of his Rapier machines are going out with the changable stroke cranks now ( last week on the phone). Maybe he has been doing that for a while im not to sure. Some rapier 2's have 2 strokes like the packer is 3.5 or 4.2 so those cranks may let you have 2 stroke options and the others have 3. I'm not 100% on this so contact cary but i think im right or close enough.
45 days? You must mean 4 or 5?Quote:
Originally Posted by Neo
Yes i meant 4 or 5 days ago
Sounds like you got the packer machine with 3.5 4.2. The others have 3 stroke options but the packer has 2. Maybe shoot cary a email but it sounds like you have a changable stroke crank. Double check with Cary
It's a Rapier I and the 2 holes are the two stroke lengths, the one closest to the center is 3mm and the other is 4mm.
There you go ! Cary is the man and he is always glad to help you out with his machines. Nothing but superb service from Cary. He shipped my machine fast too i just didnt relize it lol.( it was the best suprise :)