direct drive from rotaryworks

**1982geeeeb** · 11-07-2013, 04:51 PM

just seen this on instagram, can anybody fill me in on how the cam works, as to look at the stroke seems huge in terms of where the nipple is placed on the cam! but i gather its some sort of design that keeps the needle straight whilst in motion!

will be a good solid machine no doubt just like the rest of the range!Screen Shot 2013-11-07 at 21.47.08.jpg

**cagelavey** · 11-07-2013, 04:57 PM

i believe he has a video on facebook of it running https://www.facebook.com/photo.php?v...if_t=notify_me

**No Iron Machines** · 11-09-2013, 10:45 AM

oh ok, this CAM eleiminate the lateral movement of the needles bar, ROCK....I LOVE THIS SYSTEM

**ATS** · 11-09-2013, 11:21 AM

this could be the first DD I try.. Looks ace!

**rotaryworks** · 11-09-2013, 05:48 PM

thanks guys a few new ideas i.ve had for a while had a bit of time on my hand so put into practice plus i got iain on board now so we designing this together 2 minds better than one plus both tattooing so we can both test it and iron out any flaws ….hope you like will in stock soon i hope …any question hit us up mostly on fb but will check in now and then many thanks dale ..lots more to come t tech and hawk cartridge grips plastic autoclave able and ali and s steel ….and a machine to go with them ..

**fkirons** · 11-09-2013, 08:07 PM

Hey Dale, it looks like the stroke is really long. What strokes are you going to be offering on this babies?

**Shawn** · 11-10-2013, 08:44 AM

I see! The stroke isn't as big as it looks. The way the armature nipple is way out on the side of the cam makes the stroke look huge. But when it runs the nipple stays practically still besides the up and down motion. Very clean!