does anyone know how to open a cheyenne spirit?, I have one and the rod probably is not properly fixed so the motor spins and doesn't push the rod. I'm sure it just needs to b tightened, nut I don't have a clue how to open it to reach the motor. help anyone ??
Results 1 to 4 of 4
Thread: opening a cheyenne spirit
Hybrid View
-
11-14-2013, 12:51 PM #1Senior Member
- Join Date
- Mar 2011
- Location
- rome
- Posts
- 138
- Post Thanks / Like
opening a cheyenne spirit
-
11-14-2013, 06:17 PM #2Senior Member
- Join Date
- Mar 2011
- Location
- rome
- Posts
- 138
- Post Thanks / Like
nobody ???
-
11-14-2013, 06:36 PM #3Member
- Join Date
- Feb 2011
- Location
- dixon ca
- Posts
- 63
- Post Thanks / Like
To open the front you need a tight fitting wrench if it does not fit tight it will slip off. the rod is held in by a small 0.035 allen grub screw and some lock tight. if you are planning to take the motor out you will need to take the rear collar off and remove the 3 grub screws on the jack. to remove the body you will need a strap wrench and some patience it is covered in lock tite.
-
Post Thanks / Like
Dom liked this post.
-
11-14-2013, 06:31 PM #4Knows Whats Up!
- Join Date
- Feb 2012
- Location
- London
- Posts
- 721
- Post Thanks / Like
The top cap needs to be unscrewed if you look closely it has on each side at the top a bit missing and you could try to do that with a adjustable spanner. You will lose your warranty by doing that. It will be better to send it to Cheyenne through your supplier and get them to sort it for you. I had a problem with the connection at the bottom and it only costed me the shipping to repair it (30£). Try that first, and of it doesn't work that try DIY.
Sent from my iPhone using Tapatalk
Reply With Quote
Bookmarks