Page 3 of 6 FirstFirst 12345 ... LastLast
Results 21 to 30 of 51
  1. #21
    Senior Member polynesianworks's Avatar
    Join Date
    Nov 2010
    Location
    Kailua, Hawaii
    Posts
    234
    Post Thanks / Like
    Ttt for the workhorse!

  2. #22
    Knows Whats Up! Dreviltattoo's Avatar
    Join Date
    Jun 2011
    Location
    Worcester, MA
    Posts
    662
    Post Thanks / Like
    can you build me one with an rca?

  3. #23
    Knows Whats Up! gangstajay's Avatar
    Join Date
    Nov 2010
    Location
    Tampa
    Posts
    2,341
    Post Thanks / Like
    you can probly get an rca connector from king pin and put it on yourself and save some money
    VAGABOND JAY

  4. #24
    Knows Whats Up!
    Join Date
    Jan 2011
    Location
    doncaster
    Posts
    1,467
    Post Thanks / Like
    Or you could make one of these easily http://kryton.clickandbuild.com/cnb/...dCategoryID=19

  5. #25
    Junior Member
    Join Date
    Jun 2011
    Location
    Taipei
    Posts
    3
    Post Thanks / Like
    hi everyone, i just got a workhorse rotary machine, and i have a few problems and questions with it.
    First, do i need any specific power supply for it? and how many volts do you guys use?
    i had to turn it down to 2-3 volts, otherwise its too powerful.
    Second, i use my thumb to push the armature bar, and it stops, so i was wondering if i was using the wrong power supply

  6. #26
    Knows Whats Up!
    Join Date
    Jan 2011
    Location
    doncaster
    Posts
    1,467
    Post Thanks / Like
    Low voltage is normal for this machine. What type of power supply do you use and what do you mean when you say you push the armature bar?

  7. #27
    Junior Member
    Join Date
    Jun 2011
    Location
    Taipei
    Posts
    3
    Post Thanks / Like
    i used critical power supply,
    like people use the thumb to push up against the armature bar to see how powerful the machine is, so when i push up against it, the machine stopped running.

  8. #28
    Knows Whats Up! gangstajay's Avatar
    Join Date
    Nov 2010
    Location
    Tampa
    Posts
    2,341
    Post Thanks / Like
    I wonder if it has to do with that screw in the back of the machine that seems like it hols the crank arm on..?? I really wanted to give this machine a try, but have not seen any thing positive yet
    VAGABOND JAY

  9. #29
    Machine Builder I build Tattoo Machines slicksteel's Avatar
    Join Date
    Dec 2010
    Location
    San Jose & Morgan Hill,CA
    Posts
    4,133
    Post Thanks / Like
    I realy don't like the looks of this machine nor how it works-looks shody on the back side area compared to bill's regular stuff this does not look to good!



    SSI -SUPER SLICK IRONS-top shelf custom coil machines
    American Made Machines

    [email protected]
    https://www.facebook.com/evanstattooing

  10. #30
    Knows Whats Up! gangstajay's Avatar
    Join Date
    Nov 2010
    Location
    Tampa
    Posts
    2,341
    Post Thanks / Like
    Quote Originally Posted by chuanhsiang View Post
    i used critical power supply,
    like people use the thumb to push up against the armature bar to see how powerful the machine is, so when i push up against it, the machine stopped running.
    hmm thats odd..well if your using a cx-2 then bump the voltage up a notch at a time.. i took this off the site.. it says up to 5 volts

    - CNC Cut Delrin Body, Iron Tube Vise, and Deluxe Workhorse Hardware
    - Ideal for both Lining and Shading
    - Long stroke, medium hit, with the power you expect from a rotary
    - Voltage determines speed, dial-in to accommodate user preference
    - Optimum operating range is between 3 and 5 Volts
    - Run the motor clockwise for best performance
    - Weighs in at a mere 3.5 oz!
    VAGABOND JAY

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •