-
He stands behind his machines. He is always super informative and crazy helpful. Hit him up on facebook. I'm sure he will sort it out.
-
Post Thanks / Like
-
i have a really nice linear rotary he made with adjustable give. its a great machine.dont have any complaints
-
Post Thanks / Like
-
I have one of them and its great - had a minor issue with the needle runner - but it runs like a dream
-
im sure eddie will fix it up for free he is a stand up guy. the machine i traded to skinmech on this forum i think had similar issue. but i too didnt notice anything wrong with it before the trade as i am not a coil builder or geo/math type of dude i just run it and for me it ran sweet. what id do about your.trade instead of shipping back to eachother why not talk to eddie go halfers on shipping to him and all should be good. it sucks when a trade isnt what was expected but the best you can do is communicate and work it out witch it looks to be happening.
-
Post Thanks / Like
-
-
Senior Member
wow when did i slander you ? show me the post where i mention your name? i said the needle tension was tight to turn and i used rubber bands. i said i would trade it back after you asked me about it being right handed. then you and messaged eddie about changing it for you. he did not answer you. etc etc. look its pretty simple really. the only issue i had with the machine was the fact that i traded for a machine without adjustable give and how hard it was to turn the needle bar retainer (thingy) i do not think eddie is selling broke ass machines, nor does anyone but you from what i see. i used it no problem, the person that i got it from used it, no problems.and i'm sure eddie used or at the very least set it up and ran it before shipping it.
so yes i'm a STAND UP GUY, you got that part of your story correct.i did right by you as i would anyone my honor and reputation are worth far more than any machines ever build. the person that has been slandered here is the builder... which is what it is. but i do take offense to the comment "And I will not lie and tell everybody that this machine is great when it is not just so Rollhard can dump it on another person that is scared to speak up for fear of being bashed etc when they get" who the fuck ask you to lie? " even to imply that i would trade this to some other member is utter bullshit and reeks of your desperate attempt to sully other peoples good name. if i were out to burn someone why would even offer to trade the machine back? see that makes no sense. common problem with lies, don't let it slow you down.
anyway i'm bored with this and you so in summation here are the facts as i see them.
1) i did trade a machine with you
2) after the trade and machines were in the mail you asked if it was right handed, u could plainly see that in my photos. you said no problem, you were going to have eddie change that and carve the machine so as to have the same type of rubber band retainers as the halo and inkjecta.
3) eddie did not answer you and you were bummed about it. i offered to trade back. we did.
4) you shit all over the machine in text messages as you have here, i asked the board if anyone else had these problems you mentioned. they did not.
5) once i told you no worries i will send it back 'but before you had it in your possession mind you'. you were already back on here and other trading groups trying to trade your machine... trading something you do not even have in hand, really?
6) you are a tool
7) i have always been and will remain a stand up guy.
8) i have not re-listed the machine nor do i have any intentions of doing so.
ahh screw it. i did right by you and that is that. if people on this board figured out that you will cry foul after doing a deal for a right handed machine which is clear in the pics and then slam the trading partner the builder and probably the mail carrier and they choose not to deal with you, then that is on you. plain and simple.
sorry for my lack of grammar and numerous spelling mistakes, i'm sure reading this is painful.
Last edited by rollhard; 02-12-2014 at 11:00 AM.
Reason: i removed some bad words
I can't call it
F
-
Senior Member
tattooing with the eddie lollis. its really not as loud as the iphone makes it out to be, even using the spring tension retainer do hicky
-
If anyone needs to contact me, please just look me up on Facebook. I rarely check my emails and I have a hard time navigating through this site and don't want to offend anyone if they don't hear back from me. I want people to be happy with whatever they have that I built so I will do my best to make that happen. I understand there's no machine that's for everyone and nearly any machine made will or could, at some point, make someone unhappy. This is because we all tattoo differently using different techniques. As for the retainer screws being tight. I started using a little thread lock on the screw to prevent wear when using the machine on a daily basis. Over time aluminum can wear down some and I don't want the screw to become a problem. If it bothers anyone who has one these machines I will change it for you. Also, I commonly set the tube hole about 1mm higher than the armature. This is so once you load the machine and tighten down the needle retainer, the tension will now make it so the needle bar is running right down the middle of the tube. If you line the vice hole up perfectly with the armature from the get go, then once you apply tension to the needle bar, it will cause the needle bar to run below the center point of the tube. This can cause the tip of the needle on small liners and mags to bow upward. My alignment technique resolves that issue. Hope this helps clear up any issues people may think there is with the machine.
-
Post Thanks / Like
-
Senior Member
this is where a stand up guy would admit he's wrong and apologize.
-
Machine Builder
Ok mister rollhard-I stated the problems I found with it and you can see in the video that the needle bar is foward etc etc. Like you say -you offered to take it back if I did not like it. So could have I not just said "Hey I dont like it-its not for me and the rca gets in my way, could you please exchange back" no problems no worries -right? But I give you a valid reason why I wanted to exchange back instead of just saying I don't like it..Sure you can tattoo with it but you can also tattoo with a 15 china machine or a jail rig for that matter . And I did state in texts that I would have to get eddie to shave off the tension area flat and and put on pegs for bands to make it right..So I decided this dude(you) is just trying to dupe me and did not tell me about the problems before hand.SO why should have to deal with a machine that clearly had problems not disclosed to me before and have to spend money and time to fix it.So once again the issue was not the rca being on the wrong side-it was what was wrong with the machine ..So there you have it in a nutshell-I guess I am not a standup guy in your book. And for another matter I have done hundreds of trades and you can ask anybody-I only trade stuff in like new shape and will disclose any problems etc with the item before sending ,so I expect the same back.And to anybody that asked about my machine I said I did not have in hand and was waiting for it to come back first. And no offense to Eddie L-I was simply stating what I found to be problems on this machine.And yes I did post on facebook asking about a rca switchup publicly on facebook -I did that to get his attention hopefully for a private message reply because I did not want to put it all out there and cause him problems publicly. But it seems that you have done just that, with all your stupid rants. So have a nice day.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks