halo getting hot

[Pinhas]

yesterday i was tattooing with a 9rs ate 10.3v in a critical power supplies and the motor was getting hot really hot, in the middle of the tattoo a change rubber bands because a was thinking that was to tight but din´t change nothing. anyone have the same problem ?

[poleson]

That's a lot higher volts than what I use. I'm at 8-9 V. Is the bearing free spinning and lubed?

Sent from my HTC6435LVW using Tapatalk

[thehebro]

I use my halo at around 7.2-7.5 for black and grey,and no higher than 8 for color. I use the first gen critical power supply. Call FK Irons if you ever have any issues,they are extremely helpful.

[Pinhas]

i use mine for line from 9.5 till 10.5v and it seems very slow, for color the same as line, a don´t use for black and grey because is a 4.0mm stroke
yes is lube an oil.
may be the motor getting old?

[vodu]

Only oil or oil and grease? Because if was only oil probably your motor have oil in it


Sent from my iPad using Tapatalk HD

[Pinhas]

oil and grease a saw the video Lubricating your Spektra Halo from fk irons on youtube a did the same