Centri Machines

[The Limey]

even though you shortened it up u might want to put a 90degree down on the rca. having it staight add another inch back on the machine......hard working on neck shoulder area like someone mentioned earlier.

You could always buy a right angled RCA plug.

[Inkslinger]

Can/could I be put on the list for next batch?? Would love to try this out and I WILL post MY thoughts, opinion and results.
Thank you,

[Cyberitual]

sure thing

[Inkslingers]

I've read though some of the posts and questions about this machine, although I'm in no position to answer a lot of them, over the weekend I was able to check the machine out first hand. A friend and artist was doing a tattoo with one and let me get behind it for a few minutes to see what it'll do. My only regret was that I didn't get to do more then I did with it! "Someone" mentioned size being an issue? I thought that also, from looking a picture of it..once you have it in your hand though, it's a whole different story...you literally think you are drawing with a large sharpie. From what I understand the next generation may be somewhat smaller? Again, I may not be in the best position to comment on this because I don't know for a FACT that a downsize is in the works. As far as what I actually experienced though, this machines could very well be the future. I've always been a purist when it comes to machines and have stuck with coils, BECAUSE there hasn't been the ability to adjust the needles force. It hasn't been a matter of which is better, but just the plain fact that the technology wasn't there yet. Machines like the Dragonfly (just to name one), have changed this somewhat. But the Centri changes EVERYTHING...the technology is finally there! I personally don't like the way it looks, I don't like the size, I don't like that it doesn't come in 85 different colors... bla, bla, bla...all that makes no difference, one the first things I did this morning was message the Builder asking if I could get a pre-order, name on a waiting list, who's d*ck do I need to suck...whatever it takes to get my hands on a couple of these! Needless to say, I'm very impressed with their product...

[Bishopbyname]

Wow, that's some testimonial. How long is the wait for one of these?

I've read though some of the posts and questions about this machine, although I'm in no position to answer a lot of them, over the weekend I was able to check the machine out first hand. A friend and artist was doing a tattoo with one and let me get behind it for a few minutes to see what it'll do. My only regret was that I didn't get to do more then I did with it! "Someone" mentioned size being an issue? I thought that also, from looking a picture of it..once you have it in your hand though, it's a whole different story...you literally think you are drawing with a large sharpie. From what I understand the next generation may be somewhat smaller? Again, I may not be in the best position to comment on this because I don't know for a FACT that a downsize is in the works. As far as what I actually experienced though, this machines could very well be the future. I've always been a purist when it comes to machines and have stuck with coils, BECAUSE there hasn't been the ability to adjust the needles force. It hasn't been a matter of which is better, but just the plain fact that the technology wasn't there yet. Machines like the Dragonfly (just to name one), have changed this somewhat. But the Centri changes EVERYTHING...the technology is finally there! I personally don't like the way it looks, I don't like the size, I don't like that it doesn't come in 85 different colors... bla, bla, bla...all that makes no difference, one the first things I did this morning was message the Builder asking if I could get a pre-order, name on a waiting list, who's d*ck do I need to suck...whatever it takes to get my hands on a couple of these! Needless to say, I'm very impressed with their product...

[Inkslingers]

Wow, that's some testimonial. How long is the wait for one of these?

I couldn't personally tell you the wait time. I was told today that they took a month set back waiting for parts. I'd go to Centritattoo Machines on facebook on look for postings there.

[Bishopbyname]

I couldn't personally tell you the wait time. I was told today that they took a month set back waiting for parts. I'd go to Centritattoo Machines on facebook on look for postings there.

Virtually nothing on the Facebook, no info on the machine, there isn't even a picture of one. I'll contact him on here.

[Inkslingers]

Virtually nothing on the Facebook, no info on the machine, there isn't even a picture of one. I'll contact him on here.

Try this link on facebook if you want pictures..."Centri Tattoo Rotary Machine"

[The Limey]

Try this link on facebook if you want pictures..."Centri Tattoo Rotary Machine"

Fixed it so your link is actually a link

[Cyberitual]

Ok, so ive been having many inquires as to when the next batch will be ready. This is were i stand as of right now, My previous manufactor decided i was not a big enough contract so they decided to put my project on the shelf. One whole month went by before they had the balls to tell me that was the case. So basically i lost a month of production to the government. Since then ive found a new manufactor for my components and ofcourse they have lead times aswell. It will be 4 weeks from now till i see all of my components. So in 4 weeks i will be in the assembly state. Should take me about 5 days to assemble the whole order. I can only afford to make 50 of them at this time. Alot of people are wanting to be put on a waiting list. That is fine, but you would have to email your request to [email protected] and include your full name and shipping address. As for pre-orders i would love to take them, but are you guys willing to pay and wait that long?

If i did pre-orders and i recieved 50 at $300 each "which is half of the full price" like in 2 or 3 days that would greatly speed up the process. But i cant really sit and wait for those pre-orders to come in. Trust me, Im trying to get these out as fast as possible, but its hard when you have to rely on others. It really puts me in a position where i cant promise a shipping date untill i have these in my hands.

This batch will not have 85 different colors unfortunatly, lol I can only afford to produce 50 right now hehe, So these will be all annodized black. After all 50 sell im hopeing to have a list of favorite colors that people request so that the following batch will have all those choices in colors.

Im sorry for the lengthy lead times im having to deal with. I hope you guys are understanding and can be patient with me here. Its hard to start a company with no capital.

The new Batch upgrades are: Aluminum body, Adjustable stroke, and clip cord connections. New size in total length = 3.635 inches.
CF001F.jpgCF002F.jpgCF003F.jpg
Thanks for all your support!