Page 1 of 6 123 ... LastLast
Results 1 to 10 of 57
  1. #1
    Machine Builder I build Tattoo Machines SinnerTattooMachines's Avatar
    Join Date
    Apr 2011
    Location
    Portugal
    Posts
    89
    Post Thanks / Like

    New SINNER ROTARY TATTOO MACHINE!

    Hi, my name is Pedro Paiva, I'm a tattoo artist from Portugal and I'm happy to introduce Sinner Nosferatu!

    This machine has been developed over the past 4 years and it was not easy to get here.
    Lots of time and effort was invested developing this unique system, and hard earned tattooing money aswell, but I believe that I have something new to offer to this industry.
    All the machined parts are cut in Portugal, so we are supporting local economy.
    I decided to name it Nosferatu, and once you use it, you will understand why.

    Here's some of the features:

    SINNER MACHINES have a completely new drive system, combining the efficiency of a coil machine with the consistency of a rotary.

    Some of the features:
    The drive system of Sinner Nosferatu is something completely new from any other rotary in the market, (less time inside the skin, and more time inside the tube) emulating the downward needle acceleration and power of a coil machine. This provides easy needle penetration as the needle travels faster downwards and with more torque. This kind of cycle eliminates dragging created by a regular circular motion on a regular rotary machine, causing less skin trauma. When the needle travels upwards spends more time inside the tube improving ink flow, creating a bigger efficiency in every stroke.
    This unique drive system allows you to work efficiently even at low speeds, so you can work with big configuration needles and still have the best performance!

    There are versions of this machine:

    Liner/Color Packer :
    Line effortless with big configurations, long stroke with little vibration!
    Pack color with ease even with big mags!
    Note - you can still shade and blend with this setup, depending on your technique.
    If you like to work with a punchy shader, this setup is ideal, and if you like to shade or blend with the tip of the needles, this is also for you!

    Noise Level - With this setup, the machine sounds like a coil machine but with a lower noise level.

    Shader/Color Blender :
    With this setup the machine hits softer and it's easy to achieve softer shading, especially if you rely on stroke to shade or blend, but don't get foolled by this setup! With it, you can still line better than most rotaries on the market and pack color with ease! This setup is the most versatile for all around work, but if you are looking for a Power liner or a Power packer, get the Liner/Packer Setup!

    Noise Level - The machine is very silent with this setup.

    Sinner Nosferatu is CNC machined from blocks of 7075 aircraft aluminum.

    Black Anodized finish.

    Sinner Nosferatu has adjustable stroke. The stroke can be adjusted from 2.8 mm to 4.2 mm.
    Note - A longer than 4.2 stroke can be achieved on special request when ordering, and you still get a very low vibrating machine!

    Sinner Nosferatu is powered by a high quality custom Swiss-made 6 Watt Maxon, mounted with SKF bearings, so it will run more solid and will last longer.
    You can work long hours straight with little or no machine heating, and the same performance from start to finish.

    The bearings used on the machine are SKF, for longer life, and the drive bearing is the best available from SKF, and made from stainless steel!

    Only RCA jack connections on the machine to avoid running the motor anti-clockwise.

    The machine weight is around 140g.

    Check the facebook page an the website:

    http://www.sinnertattoomachines.com

    www.facebook.com/sinnermachines

    Any questions, feel free to ask here, or email - [email protected]

    sinner foto mao small.jpg1.jpg2.jpg3.jpg
    Attached Images Attached Images
    Last edited by SinnerTattooMachines; 06-26-2015 at 06:16 PM.

  2. Like Stripe, Vinoshitto, liked this post.
  3. #2
    Senior Member
    Join Date
    Jan 2014
    Location
    Idaho
    Posts
    495
    Post Thanks / Like
    Cool..that spring chillin in the front of the machine.

  4. #3
    Senior Member
    Join Date
    Dec 2011
    Location
    Goa
    Posts
    234
    Post Thanks / Like
    Sound really promising
    Good Work Pedro

  5. Like robinTS liked this post.
  6. #4
    Senior Member Pinhas's Avatar
    Join Date
    Dec 2011
    Location
    Portugal-porto
    Posts
    372
    Post Thanks / Like
    looks good
    parabens

  7. #5
    Machine Builder I build Tattoo Machines SinnerTattooMachines's Avatar
    Join Date
    Apr 2011
    Location
    Portugal
    Posts
    89
    Post Thanks / Like
    Thank you guys!

    Here's a video of me lining with Sinner Nosferatu.

    http://www.youtube.com/watch?v=E_IHOAH_ksA

  8. Thanks thanked for this post.
  9. #6
    Senior Member
    Join Date
    Mar 2012
    Location
    Paducah KY
    Posts
    434
    Post Thanks / Like
    I dig this. What is the weight?

  10. #7
    Machine Builder I build Tattoo Machines SinnerTattooMachines's Avatar
    Join Date
    Apr 2011
    Location
    Portugal
    Posts
    89
    Post Thanks / Like
    Quote Originally Posted by Brian Russell View Post
    I dig this. What is the weight?
    Hi Brian, the weight is around 140 grams.

  11. #8
    Machine Builder I build Tattoo Machines SinnerTattooMachines's Avatar
    Join Date
    Apr 2011
    Location
    Portugal
    Posts
    89
    Post Thanks / Like
    Here's a video of me doing a portrait with Sinner Nosferatu Shader.

    https://www.youtube.com/watch?v=a0mZlJx275g
    Last edited by SinnerTattooMachines; 06-30-2015 at 12:24 PM.

  12. #9
    Senior Member
    Join Date
    Jul 2013
    Location
    France
    Posts
    167
    Post Thanks / Like
    Unavailable video

  13. #10
    Machine Builder I build Tattoo Machines SinnerTattooMachines's Avatar
    Join Date
    Apr 2011
    Location
    Portugal
    Posts
    89
    Post Thanks / Like
    Quote Originally Posted by AltarVinz View Post
    Unavailable video
    Hi Altarvinz,
    Try this link - http://youtu.be/a0mZlJx275g

    It's working when I click the link...don't know why is not working for you.
    Is anyone having problems accessing the vídeo?

  14. Thanks AltarVinz thanked for this post.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •