Stigma Amen 10w problems- any help guys before I throw it

[Carlsworth]

Got a stigma amen from another site user, in trade for some old coils I had lying about collecting dust

So, it turns up and sounds like a bag of smashed hammers
Stripped it and went through the lube procedure - sounded slightly better - after a bit of research, it seems they need lubing far more than stigma say

So, now it only sounds like a bag of normal hammers

Ok, so, start lining with it, and its GREAT for lining, and as you would expect with the 10w, it easily lays in thick lines

However, I noticed I have to dip the ink loooooads

Once I had finished the tattoo, I stripped it down for cleaning/sterilisation, (tube grip etc) and found a huge amount of ink that had been forced UP the tip and into the tube

Why would it do this?

Also, top give adjustment screw starts to wind itself out if its on anything other than "no give"
Same for the needle steady screw-

its almost like the machine is shaking itself to bits

All the above is while using the machine at 7.5 volts-

If someone could please help me, otherwise its going on ebay - would be a shame, as it lines brilliantly

[asA]

Does it have the adjustable stroke cam on it or a fixed cam? You can actually adjust the stroke too long and the machine will hit itself causing loads of vibration.

[Carlsworth]

URRRGHHHH

I dont know

its adjustable by the knob at the top, but the strokers are interchangeable, and currently using the lining one

[AltarVinz]

There is a vice on the stroke you have to tighten it sometimes.

[Carlsworth]

There is a vice on the stroke you have to tighten it sometimes.

Hi Altarviz, thanks for the reply

What do you mean? Could you be a little more specific please


Been onto Stigma, and they want me to send it for a "service"

Surely a service isn't going to stop it feeling like its trying to smash itself to bits

[Carlsworth]

Think I get what you mean about the stroke vice- Double checked everything, and its all tight and secure

Just don't understand why its rattling itself to bits-
have to keep tighteneing the top adjustment screw when using the machine anything other than solid

[Pinhas]

take a screw off and put a little bit of paper towel on the screw.
i did this to mine and it works perfect

[Panos tattoo]

I dont like stigmas because they always have issues with the rca connections. But as far as i know the amen s not a quiet machine.if you compare it with a dragonfly or similar, it sounds like those machines they use to break concrete lol.

[Carlsworth]

Yeah, cheers Pinahs- Will try that- I did that already to the needle stay screw, but i'm pretty annoyed that a 600 euro machine has these problems straight out the box
And dealing with customer "care" is like headbutting a wall

[Pinhas]

i have two amen and in one happen the same problem. nothing that a bit off paper towel din´t resolve
i love them, line like a dream and pack solid color really easy
the nly con is the noise