Vivace

[BridgeportTattooCo]

I have the older neo-tat from eikon and it has an RCA, which is great in theory, but in reality, my rca cord slips off all the time, but i have a green mosnter with an rca cord and it's waaay too tight, how does everyone feel about the rca jack for this new vivace? or does it come with 1/8 plug?

[Administrator]

If you contact neotat directly they will tell you which distributor has what connectors for sale. The machine does have the option for the minijack plug.

[BridgeportTattooCo]

which connection do most people prefer in the neo tat?

[Alie K]

Whatever all your other machines are set up as.

[BridgeportTattooCo]

clip cord

[Administrator]

You can get a clipcord back for your current neotat machine. You can also order a clipcord vivace. If unimax has them in stock you can get it from them. Otherwise I would call neotat directly.

[Bishopbyname]

I believe that RCA connectors are better for rotaries. I get smoother power to my machines and it helps prolong the life of the motor. I got my RCA cable from Maplins here in the UK. They fit my Vivace perfectly and they're cheaper than the tattoo suppliers.

[inkbytom]

I have the same problem with the rca cord slipping off ,but I cut a half sheet of barrier film rap the cord to it an pull my Clipcord covering over the vivace and wrap the other half sheet of film around the machine it holds it.... next one clip cord ..ya might be able to get a clip cord hook up from needlejig too.

[OwlsDen]

You can also use a small piece of conductive tape. I mean really small and just at the bottom of the connector. But be careful as this can get jammed into the cable end if you aren't careful.

[BridgeportTattooCo]

is there anyone on here that have the 1/8 mono plug?