direct drive machine part

[Magnu]

Sorry Jay had a hunt thru the spares and couldn't find one I'll keep looking and let you know if I manage to find one

[gangstajay]

part.jpgso this is what I need, IMG_1561.jpghere is the diameter of the shaft

[gangstajay]

I looked on eBay.de for a kugellager 2x5x2.5mm ( i think this is tge right size could also be a 2x5x2mm )and found sets of 4 ( German made ) for around 10 - 15€ this is a do not skimp part. Cheap ones will collapse quickly.

by all means I do not want a cheap on.

[OwlsDen]

It is a small bearing. Looks interesting in the picture, like it is flanged at the rear. Convert the shaft size to metric, 1/10th inche is 2.5 mm I believe. The is your inner diameter. So 5x2x2.5 = 5mm outer diameter 2mm thick and 2.5mm inner diameter. Hopefully you kept the c-clip that kept it on.

[gangstajay]

It is a small bearing. Looks interesting in the picture, like it is flanged at the rear. Convert the shaft size to metric, 1/10th inche is 2.5 mm I believe. The is your inner diameter. So 5x2x2.5 = 5mm outer diameter 2mm thick and 2.5mm inner diameter. Hopefully you kept the c-clip that kept it on.

thats the ting it did not have anything holding it on.. I have 2 of the same machine and one was just loose i will post a front pic

[Administrator]

its press fit on. getting it on the post will require you freeze the post and the cam. when you press fit the bearing on it will slowly heat up expand and hold.

[Alie K]

Freeze it as in spray the heck out of it with compressed air? Or simply put it in the freezer?

[Administrator]

Putting it in the freezer will usually do the trick. A little locktite can also help but you will never get it off.

[rotaryworks]

My good man do you have the bits if so send them to me I can make a few for you with the bearings on them for you let me know ???

[gangstajay]

My good man do you have the bits if so send them to me I can make a few for you with the bearings on them for you let me know ???

yes actually I have one that is complete, I will throw it in the mail to you..thanks dale. I cant wait to try you direct drive machine that I got thru the group buy