Looking for an motor around 7-8000 rpm and 17mm x 25mm

**darkink** · 02-16-2012, 07:38 AM

Looking for an motor around 7-8000 rpm and 17mm x 25mm with a shaft that’s 2mm x id guess 5mm

Basically a dragonfly hawk size. I made a self promise to build a rotary after my divorce. need to kill some time. and i have tons of free time. Not looking to spend a fortune and I have searched the site. I truly don’t care if it’s some crap motor like in a rip off machine. This is just for me... to see if I can get it to work.

does anyone have one laying aroun even?

I have the frame built. And drilled

Thanks and please if u can help yell
Thanks again

**OwlsDen** · 02-16-2012, 08:14 AM

Look for a mabuchi that fits that. I have some of the ones slightly larger than that the 17x30mm for a project of my own. they are surprisingly better than i expected. Also i got them on ebay.de for about 6€ a pair.

**darkink** · 02-16-2012, 08:46 AM

thanks i may go larger. its that i have it drilled out,,,,, and have to pay someone to use their shop to drill

im looking on ebay now....thanks

**OwlsDen** · 02-16-2012, 08:55 AM

FF-180SH is the ones that i got.

**Deakon** · 02-16-2012, 03:01 PM

Drilling before you have chosen a motor? Schoolboy error!

***Administrator*** · 02-16-2012, 04:15 PM

Originally Posted by Deakon

Drilling before you have chosen a motor? Schoolboy error!

**Dan Kubin** · 02-24-2012, 10:54 PM

Faulhaber has a motor that fits that spec.. it's $114 usd

**Neo** · 02-24-2012, 11:08 PM

2160000 I think is the # of a maxon motor that will fit. Re max maxon motors have another 17 mm diamater and length should be aroud the same. Vat, customs and all the fees make buying a motor a pain in the ass(out of the states). PM me i may be able to help you a little more

**Brian** · 02-25-2012, 01:18 AM

I happen to have a few 17mm motors I have no plans for at the moment, shoot me a PM and I'll send one to you for free... The shaft is 1.5mm, let me know if you want me to throw in a flywheel too..