Just before I throw a Review on here,of this pretty extraordinary Machine.... just thought you peeps, would like to know this small piece of info.......I ran the Bazooka on my EIKON EMS 300, and you can read the speed/CPS, just like a Coil.( Probably happens with other Rotaries, first time I seen it, as I usually just go by hit)...I nearly dropped to the floor, 6v's is 75cps, 7v's is 85cps and 8v's is 95cps, these are UNLOADED speeds/CPS, so it is safe to assume that the speed will drop by 15CPS, and this will mirror the equation that V X 10 = Speed/CPS/Hertz......However step up to 10v's UNLOADED, and it reads as 125CPS.....The motor is rated at 12v's, you would need to be mad to step over 10.5v's, as it reads as 175CPS....This will probs be the most interesting Review I have ever done, as I will cover from 5v's to 10.5 v's, so taking the running figs into consideration, it should, Shade/Pack and Line, all at the "recognised" Volts....We shall see....
Results 1 to 8 of 8
-
04-18-2012, 10:27 AM #1Knows Whats Up!
- Join Date
- Dec 2011
- Location
- UK..
- Posts
- 2,444
- Post Thanks / Like
Dino Cassarin "Bazooka" Pre....Review...
Last edited by skinmech; 04-18-2012 at 10:44 AM.
-
Post Thanks / Like
aurelien liked this post.
-
04-18-2012, 10:38 AM #2Senior Member
- Join Date
- Apr 2011
- Location
- Rochester, NY
- Posts
- 153
- Post Thanks / Like
Ive been waiting for someone to review this. Cant wait!!!
-
04-18-2012, 10:47 AM #3Knows Whats Up!
- Join Date
- Jan 2012
- Location
- N/A
- Posts
- 1,517
- Post Thanks / Like
I want one of these machines. I've been looking a bit but can't seem to find a place to buy one. I want an RCA one. Anyone know what the best way of getting one?
-
04-18-2012, 10:49 AM #4Senior Member
- Join Date
- Jan 2012
- Location
- Aarhus
- Posts
- 427
- Post Thanks / Like
I got really didn't have the time to run it yet, but I'm really looking forward to the review!
-
04-18-2012, 11:02 AM #5Senior Member
- Join Date
- Apr 2011
- Location
- Rochester, NY
- Posts
- 153
- Post Thanks / Like
Ive been talking with him on Facebook. Seems to respond pretty quick.
http://m.facebook.com/home.php?soft=...user=513896610
-
04-18-2012, 11:27 AM #6Knows Whats Up!
- Join Date
- Dec 2011
- Location
- UK..
- Posts
- 2,444
- Post Thanks / Like
I loaded it up with a "loose" 11 or aka 11 Round Shader, just to do some Blood lines on my Leg.....Tightening the Screw to adjust the Needle Bar tensioner, can adjust the Duty considerably, so I slackened the tensioner right off, and put on some elastic bands.Sat at 9 V's, was approx 105-115 cps, 45% Duty, 0FT..Probs the most hardest hitting machine I came across in a while,LOL...On full pelt, it has about a 5mm stroke length,LOL, never gonna use all that, but it is there if you ever need it..Lets take a minute, to think of the Client that this Machine is being tested on....Ok, with that out of the way, will have the Review on within 36 Hours...
-
Post Thanks / Like
The Limey liked this post.
-
04-18-2012, 05:09 PM #7Senior Member
- Join Date
- Nov 2011
- Location
- Daventry
- Posts
- 270
- Post Thanks / Like
looking forward to this one
-
04-18-2012, 08:26 PM #8Knows Whats Up!
- Join Date
- Jan 2012
- Location
- N/A
- Posts
- 1,517
- Post Thanks / Like
Think I'm gunna get the one with adjustable give.
Reply With Quote
Bookmarks