79e853a8a1db11e1af7612313813f8e8_7.jpg
Got This little gem today Prompt delivery and hits like champ.
79e853a8a1db11e1af7612313813f8e8_7.jpg
Got This little gem today Prompt delivery and hits like champ.
http://www.wonderlandtattoo.net
Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
Instagram: #ROB_WONDERLANDTATTOO
Jealouuuuus!
http://www.wonderlandtattoo.net
Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
Instagram: #ROB_WONDERLANDTATTOO
So what would be the optimum voltage for this machine? I have run it today at 3.7 volts to color in some tribal and it seemed to run fine. what have any other users noticed.
http://www.wonderlandtattoo.net
Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
Instagram: #ROB_WONDERLANDTATTOO
I use mine between 2.5 an 4.6 lowest being black and grey, middle area for lining and 4.6 to push a big big mag.
---
I am here: http://tapatalk.com/map.php?uugtea
http://www.wonderlandtattoo.net
Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
Instagram: #ROB_WONDERLANDTATTOO
2.5 -4.6 is good advice, normal range of operation, You could run that machine all day at 7 volts and it wouldn't damage the machine but I couldn't say the same for the client.... You may get it up to 5v for some tasks, still well within the safety range for the machine... Have fun with that Axis....
Thanks for the volage lowdown Brian. I have been putting the carbon thru its paces at various voltages and I like to actually use it at about 4.7 for shading, and up to 5 for color packing, only used it onece so far for lining and that was at 5.3. So it's good to know that I was not over bolting the machine.
http://www.wonderlandtattoo.net
Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
Instagram: #ROB_WONDERLANDTATTOO
Bookmarks