Results 1 to 10 of 40

Hybrid View

  1. #1
    Machine Builder I build Tattoo Machines slicksteel's Avatar
    Join Date
    Dec 2010
    Location
    San Jose & Morgan Hill,CA
    Posts
    4,133
    Post Thanks / Like
    I have had this before a few times--have them use cocoa butter on the skin for at least a few days before tattooing,also massage the skin a bit and try to get to get the client drink plenty of water for a few days. Some people have really tough skin due to a lot of outside factors-tanning etc. Put more pressure on the needle without getting crazy. Make sure you do a really good stretch.Dont use to thick of pigment. Slow down your hand speed. Some people have large open pored skin and some have very small tight netted skin -look close at it under a light and you will see. Think of skin as a basket weave- a tight weaved one is hard to poke thru as and the loose weave is easy-a standard super long taper will work better as it will slide in easy but is still strong enough to hold a lasting point.Also switch out your needles after a hour are two as this type of skin can really blunt them quick(which works great for soft skin-like a bullet taper).
    Also you might want to switch to a really hard slappy slow running coil-I have one I pull out for skin like this or very large mags-the thing with rotarys is when you use large sizes are have really tough skin you must do the popping in/push as a hard hitting coil slow coil slaps it/pops it in past the outside touch layer.
    Hope this helps!



    SSI -SUPER SLICK IRONS-top shelf custom coil machines
    American Made Machines

    [email protected]
    https://www.facebook.com/evanstattooing

  2. #2
    Member
    Join Date
    Mar 2012
    Location
    springfield oregon
    Posts
    79
    Post Thanks / Like
    oh and if some one wants to look at my work look me up on face book chris higgins black magic tattoos. let me know what u think of my work and is $120 a fair price for the quality of work i put out

  3. #3
    Knows Whats Up! Wonderland's Avatar
    Join Date
    May 2012
    Location
    Saint Clair Shores, Michigan. U.S.A.
    Posts
    1,414
    Post Thanks / Like
    Quote Originally Posted by chris higgins View Post
    oh and if some one wants to look at my work look me up on face book chris higgins black magic tattoos. let me know what u think of my work and is $120 a fair price for the quality of work i put out
    Friended Ya and yeah your worth $120.00 per hour.
    http://www.wonderlandtattoo.net
    Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
    Instagram: #ROB_WONDERLANDTATTOO

  4. #4
    Knows Whats Up! Wonderland's Avatar
    Join Date
    May 2012
    Location
    Saint Clair Shores, Michigan. U.S.A.
    Posts
    1,414
    Post Thanks / Like
    I have had a few customers where it seemed that no matter what I did the ink would not stay. one of them I went over the color 6 fricken times till i got acceptable results. each time I moved slower and slower too. Sometimes it helps to just do a little at a time. I did ask him to moisture his skin two weeks before any appointment.
    http://www.wonderlandtattoo.net
    Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
    Instagram: #ROB_WONDERLANDTATTOO

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •