Hello all, Nice to meet you.
I have been tattooing for about 23 years, building coil machines and PSU's for the last 5.
Recently after a few years of playing with the older rotarys but never really liking them i was introduced to the Dragonfly, spending that crazy money was hard to come off of but
luckly its a tax right-off. lol.
anyway, I have hand build machines from all over, way to many to list, i use primarly use Eternal and Dynamic pigments and Eikon Device power supplies, once and a while ill get a wild hair to blend up my own, I currently own Maddoll Studios.
I found that I like the rotary with no recoil ( soft setting)
Results 1 to 10 of 13
Thread: Hello
-
07-20-2012, 02:12 PM #1Member
- Join Date
- Jul 2012
- Location
- Monroe Mi
- Posts
- 70
- Post Thanks / Like
Hello
-
07-20-2012, 03:29 PM #2Senior Member
- Join Date
- May 2011
- Location
- Gravesend kent
- Posts
- 233
- Post Thanks / Like
Hello welcome to the forum !
-
Post Thanks / Like
Moo liked this post.
-
07-20-2012, 04:53 PM #3Machine Builder
- Join Date
- Dec 2010
- Location
- San Jose & Morgan Hill,CA
- Posts
- 4,133
- Post Thanks / Like
Hello and welcome!
SSI -SUPER SLICK IRONS-top shelf custom coil machines
American Made Machines
[email protected]
https://www.facebook.com/evanstattooing
-
07-20-2012, 05:27 PM #4Senior Member
- Join Date
- Nov 2011
- Location
- Chicago and Greece
- Posts
- 307
- Post Thanks / Like
Welcome
Can you post some photo of your builds!At last! my arm is complete again....
Sweeney Todd
-
07-20-2012, 06:20 PM #5Member
- Join Date
- Jul 2012
- Location
- Monroe Mi
- Posts
- 70
- Post Thanks / Like
Just a basic workhorse. this one has 20 gauge springs and heavy A-bar
Its nothing special just puts the colour in and does a good job at it. Toss on a shorter front spring and a lighter A-bar and viola a cut back liner.
all around usfull frame. hand wound coils 8 wrap. I keep it pretty simple on my machines, for the most part i just build for fun and trade.
-
Post Thanks / Like
Eturnus liked this post.
-
07-20-2012, 06:32 PM #6Knows Whats Up!
- Join Date
- Oct 2011
- Location
- Bellevue, Washington.
- Posts
- 2,724
- Post Thanks / Like
nice build, welcome
-
07-21-2012, 11:02 AM #7Knows Whats Up!
- Join Date
- May 2012
- Location
- Saint Clair Shores, Michigan. U.S.A.
- Posts
- 1,414
- Post Thanks / Like
Welcome to the forum
http://www.wonderlandtattoo.net
Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
Instagram: #ROB_WONDERLANDTATTOO
-
07-21-2012, 03:28 PM #8Senior Member
- Join Date
- Mar 2012
- Location
- Paducah KY
- Posts
- 434
- Post Thanks / Like
Nice job, welcome aboard!
-
07-25-2012, 05:11 PM #9Senior Member
- Join Date
- May 2012
- Location
- NC
- Posts
- 284
- Post Thanks / Like
What's the next rotary you're buying? Since you've been bitten by the rotary bug now.
-
07-26-2012, 03:50 PM #10Member
- Join Date
- Jul 2012
- Location
- Monroe Mi
- Posts
- 70
- Post Thanks / Like
Not sure as of now, but at least one more dragonfly. Iv been milling around in the machine shop with some ideas.
Im always looking for used stuff on the cheap or trade.
Reply With Quote
Bookmarks