Don't trade away those coil machine frames, The Cartridge rotary conversion turns your coil machine frame into a high performance rotary tattoo machine.
We have been working on this project with Seth for some time now and it's finally ready for release. This Cartridge setup bolts to a coil machine frame of your choice and requires you to only run the positive lead to an insulated contact on your existing frame. In most cases, the original coil machine contact can be used and fixing the Cartridge to the frame can be done in minutes. This requires no modification to the coil machine frame and can be swapped back to original if so desired.
They should be available in a week or so and will start at $250.00 in raw aluminum and can be polished or tricked out for an additional fee depending on what is requested.
The original prototype was hand milled out of Delrin by myself, the production model is CNC milled out of aircraft aluminum and uses Workhorse Irons drivetrain and parts.
Here are some pictures of the original prototype installed on one of Seths MicroZeis Frames.
cartridge001.jpgcartridge002.jpgIMG_4026.jpgIMG_4030.jpgIMG_4031.jpg
I will post pictures of a finished production machine in polished aluminum shortly.
Results 1 to 10 of 14
-
07-31-2012, 12:17 PM #1Machine Builder
- Join Date
- Oct 2010
- Location
- San Diego
- Posts
- 229
- Post Thanks / Like
Introducing the Cartridge by Special Technique and Seth Ciferri
-
Post Thanks / Like
-
07-31-2012, 12:20 PM #2Knows Whats Up!
- Join Date
- Jan 2012
- Location
- N/A
- Posts
- 1,517
- Post Thanks / Like
Pretty sweet. Wish I had some old cool frames.
-
07-31-2012, 03:17 PM #3Knows Whats Up!
- Join Date
- Oct 2011
- Location
- Bellevue, Washington.
- Posts
- 2,724
- Post Thanks / Like
Very cool idea!
-
07-31-2012, 04:59 PM #4Knows Whats Up!
- Join Date
- May 2012
- Location
- Saint Clair Shores, Michigan. U.S.A.
- Posts
- 1,414
- Post Thanks / Like
ooooo i know just what frame one of these can go in.
http://www.wonderlandtattoo.net
Nick's Rotary, Neotat Vivace x2 (4.2 orange, 3.2 brass), Special Technique, HM Machines, Neds MR04, Lauro DD, Eddie Lollis, Halo x2 (Pink 4 and Grey 3.5), Dan Kubin MC2 3.5, Dan kubin MC2 4.0 Centri cobra, Centri evader Halo Direkt 4.2 and 3.2
Instagram: #ROB_WONDERLANDTATTOO
-
07-31-2012, 07:38 PM #5Machine Builder
- Join Date
- Dec 2010
- Location
- San Jose & Morgan Hill,CA
- Posts
- 4,133
- Post Thanks / Like
what is the weight of a basic cart?
SSI -SUPER SLICK IRONS-top shelf custom coil machines
American Made Machines
[email protected]
https://www.facebook.com/evanstattooing
-
07-31-2012, 10:34 PM #6Knows Whats Up!
- Join Date
- Jun 2011
- Location
- Los Angeles
- Posts
- 580
- Post Thanks / Like
I saw this on facebook a few days ago and got excited til I realized I dont have anymore coil frames. haha.
-
08-01-2012, 08:45 PM #7Machine Builder
- Join Date
- Oct 2010
- Location
- San Diego
- Posts
- 229
- Post Thanks / Like
The Cart weighs less than 2 ounces
Originally Posted by slicksteel
-
08-07-2012, 06:23 PM #8Machine Builder
- Join Date
- Oct 2010
- Location
- San Diego
- Posts
- 229
- Post Thanks / Like
Dust off your old coil machine frames, the Cartridge #1, the first production machine is now available.. This one is polished to a mirror finish and very difficult to photograph..
The first $250.00 + $10.00 shipping takes it..
IMG_4878.jpgIMG_4883.jpgIMG_4885.jpgIMG_4886.jpgIMG_4887.jpg
-
08-07-2012, 08:05 PM #9Knows Whats Up!
- Join Date
- Feb 2012
- Location
- chicago
- Posts
- 1,511
- Post Thanks / Like
This will be going on a original JG Russel... Sooo stooked!
-
08-07-2012, 08:08 PM #10Machine Builder
- Join Date
- Oct 2010
- Location
- San Diego
- Posts
- 229
- Post Thanks / Like
Very cool, It's yours.... Originally Posted by artoftatt2
Reply With Quote
Bookmarks