-
Junior Member
Changing stroke on Neo Tat
I just bought 2 slightly used Neo Tat machines which I have been pining over forever!
The only problem is 1 is a 1.8mm stroke and I really want/ need the 3.2mm. (or bigger)
I was wondering if anyone knows if I can change the stroke and if so how and where would I buy the part needed?
-
Machine Builder
you can,hit up neotat (ray)on here or at there office or myspace to buy the part-cam lobe/bearing. https://www.facebook.com/NeoTat
ph# 928.473.4185
http://www.taptatdaddio.com/
-
Site Technical Admin
If its a traditional neotat you will have trouble with this since the bodies dont always fit a longer stroke cam, particularly if they are earlier generation original neotats.
-
When you remove the slide bar if there is 3 dots machined into the frame it is capable of holding the longer stroke.....if not bummer
-
Machine Builder
If i remember right the original frame can go up to the 2.5 like rob said there is more metal machined out to fit the bigger cam on the latest ones.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks