Was researching rotary spec/photos upon embarking on making some, and I came across the board. Started tattooing in 2000, worked a street shop for a bit then at home while I was taking my bfa. Gave it up in 2005 as painting became priority, and as of last summer i began again, and have been lucky enough to be taken on by a local shop. I have acquired a machine shop by way of bicycle frame building. I am very in to metal work, and have built a few coil machines as far as making the screws, cores, phenolic washers from sheet, etc...I picked up a neotat a few months ago, and a lot of co-workers are using stigmas. So i am focusing on building some rotary machines now. Glad to be here.
Results 1 to 3 of 3
Thread: Hello from saskatoon SK,
-
09-21-2012, 07:49 PM #1Member
- Join Date
- Sep 2012
- Location
- Saskatoon
- Posts
- 68
- Post Thanks / Like
Hello from saskatoon SK,
-
09-21-2012, 09:49 PM #2Knows Whats Up!
- Join Date
- Oct 2011
- Location
- Bellevue, Washington.
- Posts
- 2,724
- Post Thanks / Like
Welcome aboard!
-
09-25-2012, 09:42 AM #3Senior Member
- Join Date
- Jun 2011
- Location
- Camborne
- Posts
- 366
- Post Thanks / Like
Hello0 and welcome to the forum
Reply With Quote
Bookmarks