Quote Originally Posted by Roman HM tattoomachines View Post
you are right that you can only slide the moving part inside that slot slightly over 2mm ( in fact 2,39mm .... )
but i can see that in your mathematical calculations, you are not keeping in mind that you are sliding that moving part while the excenter is still... if you slide 2mm ... we are talking about off center.. .... when the execenter actually turns you are actually get a 4 mm difference...
total stroke length is the language we want to talk about...

thanks, Roman
Yes Roman, thank you, you´re right. My measures are only the radius, and the stroke it´s actually the diameter. Thanks for the explanations