rotarywork mk2 spring ultimate warrior

**rotaryworks** · 09-02-2013, 01:37 PM

hello as a few of you know i have designed a new spring model rotary ..i wanted to modify the old spring as it needed a tweak with some stuff having said that i think the old spring is still a great machine and will be still making them .....i have tried my hardest to make this machines as simple as possible as always with my machines to try and keep cost down .....ok speck 2.5mm stroke and 3.5mm stroke .. i designed the piston to run inside the outer piston inner piston solid so its all attached not like the first spring in 2 bits making the machine a more stable piston all in one the other add is the adjuster on the top which is finger touch tighten make in the adjustment more simple to do whilst working and the tiny lock in finger touch screw all simple easy and straight forwards to use i think ....the springs its has a red soft spring and a blue hard spring these springs will do whatever style of tattooing you chose to depending on how you work that is ..the conrod which is the plastic around the bearing has been machined smaller to stop elastic bands snapping as some have problems with this on my machines ...the motor is the standard 12v motor ...the nipple has a pip on it to hold a grommet and not rub on the guide ...and the bottom of the frame has been rounded of to stop frame digging into hands ....i have tried to iron out alot of stuff in this machine ..as always takes time hence why i send you guys and girls to try ....ok think thats it if you have any thought or reviews on this machine please add here and many thanks for making this possible i thank you all and much respect .....dale rw IMG_1096.jpg IMG_1097.jpgthey available on the website now www.rotaryworks.uk.com and are £195 shipped world wide ..

**Jaytrials** · 09-02-2013, 01:41 PM

How much are these beauties and when will they be released?

**biggietattoos** · 09-02-2013, 01:56 PM

ROTARYWORKS SPRINGER REVIEW

Well I've had this machine for a few weeks now and have been able to use it for multiple tattoos and multiple different applications. So here I'm going to break down my full review of this machine and what I found to be it's strongest and weakest points.

TECH SPECS:
First off let me say that this machine is gorgeous and incredibly well built the brass frame makes it a solid heavy weight but after some use I got used to it. The machine had a strong running 12volt motor that has a very wide range of running. (6-10v) it comes with a hard and a soft spring that are incredibly easy to switch out from tattoo to tattoo for a very fun, diverse, and useful machine.

HARD SPRING USE:
Since I tend to tattoo more solid and bold and in color mostly I started with the hard spring. This proved to be the most effective for color work. With the give screw turned 1.5 to 2 turns back from it's hardest setting I worked with this setting between 7.5 and 8 volts using bugpin 11 and 15 curved mags for nice color blends and solid color packing when needed. I tightened down the give completely and bumped it up to 8.5 volts for some brilliant solid black packing on a tribal piece. I outlined a couple pieces with the hard spring (7 round), it always takes some time to get used to lining with different rotaries so I wasn't completely comfortable out the gate but I could see getting there with it if I had longer to experiment. Although a coworker of mine who uses rotaries only used it and said she was mostly comfortable lining with it right away.

SOFT SPRING USE:
I got the chance to load the soft spring on a black and grey tattoo and also on a couple smaller softer color jammers. Let me say first off that black and grey is something I don't like to do a lot of. I just have more fun with color... that being said once I got to do a b&g piece with the soft spring and the give screw dialed back 2 full turns at about 7.5 volts and a curved 15 bugpin mag this machine made me enjoy black and grey! Simply brilliant! It build up nice soft tones and made my work smoother. I've been using a vivace 2.5 for black and grey recently and this was right on par with it and I can see it working even better with some more time behind it. I absolutely love the way it ran and how it works so effortlessly for soft tattoos.

OVERALL IMPRESSION:
While it definitely has some getting used to with the weight and has the "learning curve" for lining that I didn't quite get comfortable with in my time with it this machine is incredible for virtually any tattoo you would need it for. I can easily see 2 or 3 of these and a coil liner as a daily arsenal (especially with the great build quality you get for the price). at the end of the day it's all about personal preference and comfort and if you use coils this would be an amazing introductory machine if you want to give rotaries a try. If you're used to lighter rotaries then there is a Aluminum version that I am certain will be equally awesome. This is an easy to adjust easy to use no bullshit machine with a straightforward design. on a 10 point scale I gotta give the Rotary Works Springer8.5/10.

Quick Summary
STRONG POINTS:
Color, solid packing, and soft black and grey

LESS-STRONG POINTS:
Lining takes time to adjust to, weight with the brass frame can be tough to get used to.

Thanks Dale for trusting me with your machine. Can't wait to try another!