Inkjecta flite nano?

[blackdeath]

As stated in another thread, if "y'all" bothered to look...

Inkjecta's Flite Nano has a slightly smaller body, an RCA plug angled to the rear, is a fraction lighter, has no delayed start-up, broader voltage range (4.5-20V), and comes with MX6 lubricant.

The Elite model has a chrome 3.25mm cam, additional bars, LED activation light and side bumpers; while the Lite has no light or bumpers, a standard 3.25mm cam (same as those that come with the V2), and semi-rigid bar only.

Sucks that you don't get the additional bars and cams with the Nano like you did with the V2, although some people might only use one of each anyway. I guess you could look at it as trading in the extra bars/cams for the up-dated features, but then I suppose it also depends if you prefer different set-ups (can't find the alternative cams to purchase separately as yet though).

I already have a V2, but needed another machine and settled on the Lite model and additional bar pack as I don't really care for the novelty features and have been running my V2 set up with a hard bar. So, the Lite and bars was only an extra $66 AUD than the V2 (or $5.50 AUD with no additional bars), and I find it runs a little smoother.

All up, it might not be ground-breakingly innovative, but surely some see it as an improvement on the V2.