Results 1 to 10 of 86

Thread: Lace Nano

Hybrid View

  1. #1
    Machine Builder I build Tattoo Machines No Iron Machines's Avatar
    Join Date
    Nov 2011
    Location
    ITALY
    Posts
    570
    Post Thanks / Like
    this kind of MAGNETIC MACHINES, same as JOHN CLARK, always gonna stop the needles outside the tubes, always, becouse the magnet actract the armature bar, so for my opinion is not very smart idea

  2. #2
    Machine Builder I build Tattoo Machines fkirons's Avatar
    Join Date
    Dec 2010
    Location
    Miami Beach, Florida
    Posts
    2,143
    Post Thanks / Like
    Quote Originally Posted by No Iron Machines View Post
    this kind of MAGNETIC MACHINES, same as JOHN CLARK, always gonna stop the needles outside the tubes, always, becouse the magnet actract the armature bar, so for my opinion is not very smart idea
    I've play around with similar concepts in the past and in all my experiences, attracting poles will always win when motor is off because the pole of the magnet attached to the swivel arm will force the oposite pole of magnet thats concentrically attached to the motor to spin and line up with opposite pole from swivel arm. Therefore needle will retract. For I can see this machine should behave the same way unless there is something different going on from what I can tell from the video.
    For Customer service please contact Kayleigh
    Email under "Contact Us" at fkirons.com


  3. #3
    Senior Member
    Join Date
    Aug 2011
    Location
    Switzerland
    Posts
    372
    Post Thanks / Like
    Quote Originally Posted by fkirons View Post
    I've play around with similar concepts in the past and in all my experiences, attracting poles will always win when motor is off because the pole of the magnet attached to the swivel arm will force the oposite pole of magnet thats concentrically attached to the motor to spin and line up with opposite pole from swivel arm. Therefore needle will retract. For I can see this machine should behave the same way unless there is something different going on from what I can tell from the video.
    Exactly. John's machines have the armature bar on top and the same forces regarding polarity pull the needle down, leaving the needle exposed. Here it pulls it up retracting the needle.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •