New SINNER ROTARY TATTOO MACHINE!

[SinnerTattooMachines]

Hi, my name is Pedro Paiva, I'm a tattoo artist from Portugal and I'm happy to introduce Sinner Nosferatu!

This machine has been developed over the past 4 years and it was not easy to get here.
Lots of time and effort was invested developing this unique system, and hard earned tattooing money aswell, but I believe that I have something new to offer to this industry.
All the machined parts are cut in Portugal, so we are supporting local economy.
I decided to name it Nosferatu, and once you use it, you will understand why.

Here's some of the features:

SINNER MACHINES have a completely new drive system, combining the efficiency of a coil machine with the consistency of a rotary.

Some of the features:
The drive system of Sinner Nosferatu is something completely new from any other rotary in the market, (less time inside the skin, and more time inside the tube) emulating the downward needle acceleration and power of a coil machine. This provides easy needle penetration as the needle travels faster downwards and with more torque. This kind of cycle eliminates dragging created by a regular circular motion on a regular rotary machine, causing less skin trauma. When the needle travels upwards spends more time inside the tube improving ink flow, creating a bigger efficiency in every stroke.
This unique drive system allows you to work efficiently even at low speeds, so you can work with big configuration needles and still have the best performance!

There are versions of this machine:

Liner/Color Packer :
Line effortless with big configurations, long stroke with little vibration!
Pack color with ease even with big mags!
Note - you can still shade and blend with this setup, depending on your technique.
If you like to work with a punchy shader, this setup is ideal, and if you like to shade or blend with the tip of the needles, this is also for you!

Noise Level - With this setup, the machine sounds like a coil machine but with a lower noise level.

Shader/Color Blender :
With this setup the machine hits softer and it's easy to achieve softer shading, especially if you rely on stroke to shade or blend, but don't get foolled by this setup! With it, you can still line better than most rotaries on the market and pack color with ease! This setup is the most versatile for all around work, but if you are looking for a Power liner or a Power packer, get the Liner/Packer Setup!

Noise Level - The machine is very silent with this setup.

Sinner Nosferatu is CNC machined from blocks of 7075 aircraft aluminum.

Black Anodized finish.

Sinner Nosferatu has adjustable stroke. The stroke can be adjusted from 2.8 mm to 4.2 mm.
Note - A longer than 4.2 stroke can be achieved on special request when ordering, and you still get a very low vibrating machine!

Sinner Nosferatu is powered by a high quality custom Swiss-made 6 Watt Maxon, mounted with SKF bearings, so it will run more solid and will last longer.
You can work long hours straight with little or no machine heating, and the same performance from start to finish.

The bearings used on the machine are SKF, for longer life, and the drive bearing is the best available from SKF, and made from stainless steel!

Only RCA jack connections on the machine to avoid running the motor anti-clockwise.

The machine weight is around 140g.

Check the facebook page an the website:

http://www.sinnertattoomachines.com

www.facebook.com/sinnermachines

Any questions, feel free to ask here, or email - [email protected]

sinner foto mao small.jpg1.jpg2.jpg3.jpg