This is going to be a pretty short review. The last time i was this frustrated with a purchase was when i bought a German Evolution, the difference is that machine didn't cost me 480 euros! I switched the machine on and 10 minutes into running it, this happened:
photo(21).jpg

There is no securing device on the bearing so because of the angle of the crank it simply flew off! I adjusted the angle by loosening the cam bearing and highering it up but i shouldn't have to do that. Most other machines have secure parts that don't fly off after 10 minutes.

photo(22).jpg

This 2nd picture clearly shows the crank making contact with the cam bearing. This is a very basic measurement error! There only needs to be 1mm clearance! It makes the machine have a terrible sound and action, preventing it from running or sounding smooth and contributing the the issue of the crank flying off. To say i feel robbed is an understatement! I love buying and trying new machines but situations like this make mewant to stick to the builders i know deliver every time.

Sorry it's a negative review but hopefully i can give you guys food for thought before parting with your hard earned cash.