New Disposable Tubes

[andrewc]

what machine is that that you got the smaller grip hooked onto? fuckin nice man

[fatcashdaddy]

what machine is that that you got the smaller grip hooked onto? fuckin nice man

thats an aluminum rotary works (12volt motor)..I re-covered the motor and had the frame hand engraved

[OwlsDen]

Those silver grips sound great. I will have to search out some.

[fkirons]

Disposable ones are the winner! But now you are limited to their needles. Its always something!

[fatcashdaddy]

Disposable ones are the winner! But now you are limited to their needles. Its always something!

with the plastic disposable ones you can use either hawk or T-tech cartridges, you just have to modify the drive bar. I bought about 2ft. of 3/16" delrin rod and made my own drive bars out of regular needle bars...
the black cartridges only work with the aluminum tubes and the tubes are autoclavable...

[fkirons]

Love the tubes, tempted to design my own mwwaaahhhahaha

[OwlsDen]

Love the tubes, tempted to design my own mwwaaahhhahaha

Make one that works with all of the cartridges. I'd buy it.

[andrewc]

so in your opinion which would be the best ones to go with here? the aluminum ones are claiming to be the best ones except for the hawk ones (at least theyre being honest in their opinion of it) or the t-tech or the other disposable ones you have?

[fatcashdaddy]

it depends on what your looking for. If you have a hawk (spirit or thunder) and/or use T-tech and want a disposable option, then I would stick with T-tech's or hawk cartridges and look into the disposable tubes...If your looking for the cheapest way to use cartridges on any machine other than the hawk and marksman, I would go with the aluminum tubes and black cartridges..so far I've done about 12 tattoo's with the black cartridges and I've had one bad cartridge (hooked needle on a 5 RL)

oh and if you prefer bugpin needles, i would stay with T-tech....

[galino]

I have those as well.. those cartridges are very nice (i like them better than T-tech) but they don't work with T-tech grips and i don't think they fit the hawk. I know they don't fit my marksman.. you have to use those aluminum grips with those cartridges. i have all my machines converted to that system and i hope to be distributing them soon. they are cheaper than T-tech in price too ( 10.00 a piece for the grips,either 3/4 (19mm) or 1" (25mm) and .50 a piece for the cartridges (any size))
if anyone wants a sample order of that particular system i can send you 1 grip (your choice of size) and 4 sample cartridges ( 1 each of 5&7 liner and 7&9 mag) for 15.00 USD

How much will cost to send those samples to Europe?