Nedz MR03 available soon.

[Nedz]

The MR03 will be available in the next couple of months, here is what it going to look like.
16629

[MickWrath]

Nice! T-techs or hawk tips? Or both?

[Nedz]

It will take both Hawk and T-Tech cartridges and the motor separates from the body so it can be autoclave.

First batch will be red and black and only come with RCA as I dont think it will be possible to do a clip cord and still have a clean look.

Dimensions are 22mm grip - 28mm body section over all length 135mm

Price will be £295

[luckyyoutattoo]

looks very impressive

[Vinoshitto]

sweet... keep the clean look, and let people ad a clip cord converter if they want to..

coming to think of it, I don't think I've seen a RCA to Clip cord converter before. Only the opposite.

[johndameart]

cant wait to see it finished

[acink]

very interesting cant wait to see the finished machine i better start putting money in the paypal again

[johndameart]

Im guessing the black part is the grip? now how long is the grip exactly?

[(Opted Out)]

It would be nice if you could do a fully disposable setup for this..

[artoftatt2]

Or at least affordable grips so you can buy ten extra..

[johndameart]

agreed on both

[gautam]

+1

Or at least affordable grips so you can buy ten extra..

It would be nice if you could do a fully disposable setup for this..

ya thats what i look for...

[Nedz]

The machine comes in three parts the as follow :

Motor body
Holds the the motor and wiring to the RCA.

Main body
Holds the plunger mechanism.

Grip
Screws to the main body and allows you to adjust amount of needle hanging out.
The grip will be 22mm diameter to start but probably come in 25mm and 28mm as well.

You will be able to autoclave the grip and main body if needed.

[MickWrath]

im super excited for this, but I gotta wait until all black is born hint hint haha,

[Jan Li]

It look cool but what about the Weight distripotions, grip 1/3 and 2/3 body and the power connections at the top looks A bit High and difficult to work with. Hope its not an issiue look forward to see Real pictures. Jan

[Shawn]

I'm excited it will push the hawk carts. I had a stylus and it just didn't have any power.

[Sinnersink]

shawn which stylus? it didn't have the power?

[Tat2dPinoy]

How much are the extra grips separately?

[Nedz]

I think the extra grips will be £75 each.

[Tcoe13]

Very sweet! so clean and streamlined too! does is have any give (dampening) or is it direct drive?

[Nedz]

https://www.facebook.com/photo.php?fbid=315624331874564&set=a.246657382104593.36295.100002810005071&type=1&theater


Here is the latest picture of the MR03 with 26mm grip before anodising.

[Nedz]

https://www.facebook.com/photo.php?fbid=315639991872998&set=a.246657382104593.36295.100002810005071&type=1&theater

MR03 in hand.

[MickWrath]

Links not working. Will these guys be available in all black soon? And what's the watts and volts of the engine? Pancake? Etc. I def wanna try one of these!! Mick!

[OwlsDen]

Well I am getting interested. I can't wait to hear all the specs. It looks like one of the first cartridge machines that has the right idea. It is sleek, simple and easy to clean. Looks like an ergonomic marker. Looks like you are on the right track.

[Nedz]

Pictures are on face book if you can't see the links but I have taken the photos with my iPhone sorry could not wait.

I am using the Faulhaber 17x17 12 volt motor.

weight should be between 150g and 170g depending on the grip size you choose.

[MickWrath]

Awesome!!

[artoftatt2]

Ill take the one in your hand! Haha

[Sage Oz]

It definately looks smaller and cleaner than I first thought....nicely done!

[MickWrath]

Sage where did you find em? The links aren't working for me and I searched the Nedz FB an can't seem to find em! Arrrrgghh!

[Sage Oz]

http://img.tapatalk.com/d/13/02/26/6yzujeza.jpghttp://img.tapatalk.com/d/13/02/26/zane6yde.jpgI just clicked on the link above, worked for me. They are on his FB page though...

[serial1313]

Not to say that there won't be a difference, but I am asking what the difference will be between this machine & the Stylus H or S. I don't have a Stylus or know anybody involved w/ Stylus, I am just wondering. Obviously the grip is different.

[johndameart]

that thing is a pretty good looking size :) i figered it would of been bulky and akward to hold from the original pictures but i was wrong, i want to try it out :)

[OwlsDen]

Not to say that there won't be a difference, but I am asking what the difference will be between this machine & the Stylus H or S. I don't have a Stylus or know anybody involved w/ Stylus, I am just wondering. Obviously the grip is different.

Exactly my question too. I am wondering if there will be a slight amount of set give maybe. I am also curious if the larger 1724 Faulhaber would maybe be an option.

[artoftatt2]

It will run faster.. A lot faster than the stylus.. You get a little dampening from the cartridge spring..

[MickWrath]

Awesome thanks Sage!!

[Sage Oz]

Good luck getting this thing through airport security; it looks like James Bond's lightsaber. Or his dildo.

[BigGreg]

I'm totally stoked to try one of these. Loved the stylus, but it seemed to make me work alittle slower. This looks like that shouldn't be an issue.

[BigGreg]

Also is it adjustable stroke or fixed stroke? If fixed, what length is it?

[Nedz]

Stroke length it set by the cam and will be 4mm as standard but I may supply 3mm and 5mm cams as well. You will be able to change your cam on the motor quite easily but a motor body with motor and cam will be only £85. So you will be able to adapt your machine to your style by changing the motor body which take a few seconds.

[Shawn]

I would like to see some photos of it taken apart.