Has anyone been able to do this? I dropped my hawk and the motor came off center in the machine, I have no idea how to crack open the case...
also the "needle bar" came loose from the motor as well.. any help is appreciated
Results 1 to 4 of 4
Thread: Fixing A Cheyenne Hawk
-
10-08-2014, 11:19 AM #1Junior Member
- Join Date
- Jan 2013
- Location
- Bridgeport, Connecticut
- Posts
- 1
- Post Thanks / Like
Fixing A Cheyenne Hawk
-
10-08-2014, 04:06 PM #2Machine Builder
- Join Date
- Nov 2011
- Location
- ITALY
- Posts
- 570
- Post Thanks / Like
is weird to open this machine, on the front part u can unscrew a flat plug and inside have the wheel wher attaach the needles bar, annd on the motor cover u can unscrewed in half, u check on YOUuTUBE that have some video ??
-
10-10-2014, 06:27 PM #3Knows Whats Up!
- Join Date
- Jul 2013
- Location
- indianapolis
- Posts
- 1,403
- Post Thanks / Like
You have to heat it up before you try to loosen due to the lock-tite on the threading. With a heat gun or a good hair dryer. Other wise it's damn near impossible to turn and electrical tape in your pliers, to avoid scratching
-
10-11-2014, 01:15 AM #4Senior Member
- Join Date
- Jan 2014
- Location
- Idaho
- Posts
- 495
- Post Thanks / Like
A friend of mine and I, wer able to untwist the hawk thunders with our bare hands. No glue In mine,.the spirit on the other hand,, that had glue I ended up scratchin up minez,
Reply With Quote
Bookmarks